Prime all question

[ernbar]

Which color bag is the binder that comes with the Prime all product?
I’m ready to mix the Prime all to make some caps and recall reading not to add the included binder because it doesn’t work, recommending to use single based smokeless powder diluted in acetone as a binder instead. I have my binder made out from acetone and IMR 3031.

 

[TDM]

Which color bag is the binder that comes with the Prime all product?
I’m ready to mix the Prime all to make some caps and recall reading not to add the included binder because it doesn’t work, recommending to use single based smokeless powder diluted in acetone as a binder instead. I have my binder made out from acetone and IMR 3031.

I have some, and both the #10 and #11 dies. Just never got around to using them yet. If no one answers soon I’ll get one of my Prime All packs out and look.

 

[AlexB]

The tan bag.

 

[ernbar]

SUCCESS!!!

I used the Prime All and a drop or two of IMR 3031 diluted in acetone as the binder, let it dry overnight. Went to the back concrete paver deck and tapped it with a hammer…..BANG! That sucker sounded like a 22lR going off, VERY loud! Can’t wait to try them out at the range.

 

[AlexB]

SUCCESS!!!

I used the Prime All and a drop or two of IMR 3031 diluted in acetone as the binder, let it dry overnight. Went to the back concrete paver deck and tapped it with a hammer…..BANG! That sucker sounded like a 22lR going off, VERY loud! Can’t wait to try them out at the range.

Congratulations on your success!
I use acetone and duco cement as a binder that works really well so far.

 

[AlexB]

Last petty hurdle jumped for the DIY caps.
The printed six shot composite cappers from polish cappers fit as is and work great.
The plastic unit that holds 80 also works with two small cuts to widen the channel a couple mm.
Still works with standard caps as well I like them both and consider the $29 well spent.

 

[JimCunn]

Last petty hurdle jumped for the DIY caps.
The printed six shot composite cappers from polish cappers fit as is and work great.
The plastic unit that holds 80 also works with two small cuts to widen the channel a couple mm.
Still works with standard caps as well I like them both and consider the $29 well spent.

Ciuld you say more about this please?

 

[AlexB]

Ciuld you say more about this please?

Sure anything in particular you want to know?
I think that the 3D printed caps are gonna make the aluminum ones last resort before buying them.

 

[JimCunn]

"The plastic unit that holds 80 also works with two small cuts to widen the channel a couple mm"

More about this. I got no clue what you are talking about.