CLOSED Ramrod puller

[Flintlock Whiskey]

Got one you want to let go of?

 

[mloader40]

The best rod puller you can get is a synthetic Arrow puller at a local sports shop very cheap and will not hurt your ramrod

 

[FishDFly]

Log Cabin has them.

 

[Hatchet-Jack]

Larry Callahan makes a pair of bad pliers that are also ramrod pullers. I just bought a pair from Larry at the CLA show. They are in this picture of my haul, under the bad mold.

 

[Flintlock Whiskey]

The best rod puller you can get is a synthetic Arrow puller at a local sports shop very cheap and will not hurt your ramrodView attachment 90070

Capitol idea (if one can use such a phrase in this "enlightened" time.

 

[Rudall]

You’ll need to explain that one.

 

[Eric Krewson]

I use this one for really stuck ramrods.

 

[Flintlock Whiskey]

I use this one for really stuck ramrods.
View attachment 90193

That's what I'm looking for. Out of stock everywhere at the moment. Might have to machine one for myself.

 

[EC121]

Take a piece of paracord or thin rope and put 2 or 3 half hitches on the ramrod. Run some water,etc. down the barrel to wet the fouling. Tie the other end of the line to a tree or post and yank. The paracord will fit anywhere. Weighs next to nothing.

 

[Larry (Omaha)]

Got one you want to let go of?

No, I do not. Never had one, but there are some good suggestions above. I have a RR with pinned threaded tips on both ends. If you screw in a oversized jag. (such as a 58 cal in a 54 or 45 ram rod) then hook the jag on a wood post or fixed chunk of wood. Pull the rifle, not the RR. Works for me.
Larry

 

[MSmith]

Powder - push it out.

 

[EC121]

I did that once. I had a jag on a wooden rod stuck in an old original English 12ga. double with an enlarged breech. I think the jag got hung on the end of the barrel where the breech was corroded larger than the barrel. Anyway, I pulled the nipple and put about 10-15grs. of 2F under it. It shot the rod(made a sort of "bloop" type of sound) jag and all out of sight up on a wooded hillside. It whistled all the way. Fortunately it was borrowed wooden rod.

 

[Sudsy]

The best rod puller you can get is a synthetic Arrow puller at a local sports shop very cheap and will not hurt your ramrodView attachment 90070

I even have one of those, never thought to put it in the BP box

 

[Ames]

That's what I'm looking for. Out of stock everywhere at the moment. Might have to machine one for myself.

You want one? Contact me. I bought one 5 years ago but never use it. Not sure where I left it at the moment.