- Joined
- Jan 31, 2009
- Messages
- 13,055
- Reaction score
- 7,311
For sale, an RCBS hollow base mold in excellent condition, #45-280-M, 280 grain wide flat nose.
First private message saying I'll take it goes to the head of the line.
$70 plus shipping.
-
If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
CLOSED RCBS 45-280-M
- Thread starter nkbj
- Start date
Help Support Muzzleloading Forum:
- Status
For sale, an RCBS hollow base mold in excellent condition, #45-280-M, 280 grain wide flat nose.
First private message saying I'll take it goes to the head of the line.
$70 plus shipping.
45. Any idea of the diameter. ?
- Joined
- Jan 31, 2009
- Messages
- 13,055
- Reaction score
- 7,311
My calipers say .445" on the cast samples.
Thanks I was hoping larger around .458 or ,459
- Joined
- Jan 31, 2009
- Messages
- 13,055
- Reaction score
- 7,311
Oh no such luck generally for the RCBS, Ohaus, Lyman and Ideal molds.
.445 seems to have been the target when they made their cherries.
Over the years I'd slowly collected some RCBS, Ohaus, Challenger and Lyman designs (and a .444 diameter sizer) with the intent of putting together a lighter weight percussion piece of .445 bore with rifling for minies. Something to enjoy shooting with light charges and the fairly well instant reloading that big lube grooves and hollow bases provide. Alas, that plan is gone by the way side. If no one wants the molds perhaps I'll drop back and revive the project.
.445 seems to have been the target when they made their cherries.
Over the years I'd slowly collected some RCBS, Ohaus, Challenger and Lyman designs (and a .444 diameter sizer) with the intent of putting together a lighter weight percussion piece of .445 bore with rifling for minies. Something to enjoy shooting with light charges and the fairly well instant reloading that big lube grooves and hollow bases provide. Alas, that plan is gone by the way side. If no one wants the molds perhaps I'll drop back and revive the project.
- Status
Similar threads
- Locked
