Re vamped peep

[Crow#21957]

I've got this same peep on another gun. Was thinking of using same style peep on my 32 but the up snd down set screw was going to fall about 1/2 in.past the end of tang and would be resting on the wood of the stock.I had already cut the peep for another gun. So here's my reworked peep. Will send more pics so you can see the other gun and before and after modification.

 

[Crow#21957]

Here's the long peep on my 36 on left and in 32 modified on right

 

[Crow#21957]

Here you can see where tang stops and sight goes past it. This way the elevation screw is not going into the wood. The bar of the sight that hangs out over the tang some will have a leather pad under it to protect the wood.

 

[Crow#21957]

Part of the enjoyment of building these ML,s
Is solving some build problems , but a few less would be ok cause I've had to much of that enjoyment lately. LOL