Rear sight for Investarms Hawken

[kelleyjk]

Looking for recommendations, experience, gotta haves, do not bothers, etc.

Found a few for T/C but none for Investarms unless Im missing something theres millions of these Investarms floatin around under different names, Cabelas, Richland Arms, etc. gotta be something better than the giant monstrosity they come with.

Adjustable or fixed, prefer a primitive but Id consider a solid elevation only adjustable if theres a good one, already checked T.O.W.

 

[ebiggs1]

Do you want to cut a dovetail in the barrel?

 

[BrownBear]

If it's dovetailed like the Lyman barrels, there's a huge selection of style at Track of the Wolf and several other sources. Scroll down that page to the Sights listing and feast your eyes.

If dovetailed, the biggest hassle will be that it's metric rather than the US standard of 3/8". It's not really a problem since the metric is a little smaller than 3/8", so all you have to do is file down the dovetail on the sight for a snug fit. This one was my pick, BTW.

 

[kelleyjk]

theyre not dovetailed

I can cut a dovetail and I can silver solder etc but would rather just replace with the same base which is a screw down flat base

so Im lazy this is just a plinker not really wanting to spend much time on it have more money than time right now

 

[BrownBear]

If you don't mind the freight, how bout something like this? Just drill it to match the existing holes in your barrel.

 

[Stubert]

I put a T/C hunter peep on my Investarms .58 cal.
Use one of the tang holes, and tap the other hole in the middle of the tang.

 

[Rogue River]

I second the T/C Peep! :thumbsup: