Renagade

[Marrowback]

Does anyone know what to do about my set trigger ? When I set trigger and pull fire trigger the hammer only comes down 1/2 way. If I don't use set trigger the gun operates fine.

 

[plmeek]

Sounds like the fly in the tumbler may be damaged or missing.

 

[Grimord]

Sounds like the adjustment screw between the triggers needs to be re-adjusted. Once you get it the way you want, put a drop of lock-tite or nail polish on the treads to keep it from going out of adjustment again.

 

[Marrowback]

Thanks much !

 

[Marrowback]

Sounds like the adjustment screw between the triggers needs to be re-adjusted. Once you get it the way you want, put a drop of lock-tite or nail polish on the treads to keep it from going out of adjustment again.

Thank you

 

[longcruise]

Check all the screws to the internals of the lock. This has happened several times with my TC locks and the problem was loose screws.

Not the same as the nut behind the trigger.

 

[bubba.50]

My money is on plmeek. If the fly is missing or damaged the half-cock notch will catch the sear every time with set triggers. But in unset mode you hold the trigger against the sear arm until the hammer gets past the half-cock notch.

 

[Marrowback]

Check all the screws to the internals of the lock. This has happened several times with my TC locks and the problem was loose screws.

Not the same as the nut behind the trigger.

Thank you.Will do

 

[Ruben44]

Had the same problem on a T/C Renegade .50, and like plmeek said, check the fly. It was missing on mine. Replaced it and it works great now.