-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
renegade breech plug
- Thread starter bhuch5
- Start date
Help Support Muzzleloading Forum:
curator
45 Cal.
- Joined
- Dec 28, 2004
- Messages
- 685
- Reaction score
- 126
IIRC the original plug threads were 11/16X14 however, the possibility of removing this in a home shop is very unlikely. T/C winds these in with a huge mechanically operated tool. Even with heat/penetrating oil/ pipe-externer on wrench handle, it will not come out. You may be able to send it to the T/C factory but you best bet is to cut the old breech off and re-thread. Track of the Wolf offers this service for a very reasonable price. Call them and tell them what you have in mind and save yourself a lot of grief.
