Replacement sights for Pioneer by Traditions.

[kelljp]

Ended up trading for a Tradition Pioneer, previous owner had started replacing front and rear sights but never followed through. He can't find the original ones, so I'm in such of replacements
Had several sights lying around but none that fit the dovetail cuts in the barrel. I looked on Traditions sight but it appears they no longer have parts. Any idea what dovetail width is on front and rear sights ?
TOW or Gunwerks likely have something but not sure dimensions. Can't find the manual for this one.

 

[pacanis]

Keep in mind, TOTW's measurements the width is side to side. The length is muzzle to breech. As in 3/8" dovetail being a common dovetail cut. That is the length.
And then there is the thickness of the base...

I don't have that gun where I can measure what sights are on it. But you should be able to measure the notches. They might have been altered.
And of course you'll have to fit the sights anyway.

 

[kelljp]

The sights are missing, but the notches are 1/4 inch by 1/2 inch .
Looking at TOW and Log Cabin I don't see any, appears to be an odd size.

 

[Slinginslugs]

Euro dovetail possibly. Metric maybe. Probably .360 look for Lyman rear #16AML and 37ML front or the 37AEU globe target front

 

[Slinginslugs]

If you have an old spanish made cva or traditions most of them had the euros. Nock one out and see if it fits