Revolver loading

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
It depends on your climate, your loading technique and your capping. I have had much better luck for some reason with conicals than RB. Some folks have tricks to seal the caps on the nipples that seems to help. Personally I shoot my 1858 fresh once a week and sometimes every two weeks. very occasionally three weeks.
 
Some of the substitute powders may not last as long as real black powder. What do you intend to load it with?
 
It depends on your climate, your loading technique and your capping. I have had much better luck for some reason with conicals than RB. Some folks have tricks to seal the caps on the nipples that seems to help. Personally I shoot my 1858 fresh once a week and sometimes every two weeks. very occasionally three weeks.
So un capped it should be good for a couple of days in Idaho
 
un capped in Vermont in the summer with real BP and it would missfire and hang fire after one day. Capped with waxed conicals and T7 I have had great luck and reliability after several weeks. longest about 3 weeks. Usually cant go much longer than that without getting the itch to shoot it.
 
I left mine loaded (black powder & capped & wonderwad) just about a year once and when I shot it empty, everything about it looked like it had been loaded that day. Left it loaded for a week or two many times.
 
Dunno why you'd want a lubed wad anyway.
Does it gain you anything on the first 6 shots of a firearm that's been stored for a very long time?
Do you think it would gain anything if used right now?

I've always just used them because it was once recommended and to take up cylinder space so the rammer would seat the ball
 
Do you think it would gain anything if used right now?

I've always just used them because it was once recommended and to take up cylinder space so the rammer would seat the ball

Doubtful, though I've never used them. Can't come up with a reason why I would want to. I only use real black powder, and I generally stick with full power loads so space is not an issue.

Maybe it does something for someone who shoots one gun all day long. I don't generally fire more than 5-6 cylinders out of a single gun in a session. If I were wanting to go longer, it seems like running a brush down the barrel after a bunch of cylinders is less time and money than fiddling with wads and lube.

Guns are made for killing stuff, and practicing with lighter charges doesn't do me any favors. If I want to use less powder, I'll shoot a smaller gun.
 
Well mine with full chambers made a lot more soot and not much gain otherwise. I suppose that if I used conicals like the soldiers that the loading lever would seat them better than with ball. 18-20 gns. seems to be the sweet spot for me
I read someplace that the wad acts as a gas seal behind the ball.
 
I left my pistol loaded with paper wrapped cartridges and capped for a year. All six chambers fired as they should. There was no grease above the balls either. I also left it in a leather holster with no damage to the blueing.
 
FWIW I left a clearly marked "LOADED" perc rifle with a lubed Maxi over 3f in the safe for 10 years. No humidity control and I live in a humid climate. When I finally got around to firing it that thing fired like I loaded it 2 minutes ago. don't worry about it.
 

Latest posts

Back
Top