• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

WITHDRAWN Rogers and Spencer Silver in Color

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

Jappo

Poco Loco
MLF Supporter
Joined
Oct 24, 2022
Messages
1,591
Reaction score
1,461
Location
Texas
Don't know if this is stainless steel. A magnet sticks to it. So I'm just going to say silver in color.
This revolver had an issue. The cylinder would not turn. I fixed that. The hand spring was missing. It will go into half cock and full cock ok. The only thing is if I cock it slow it works great. If I cock it a little faster it won't lock up at full cock. It goes past the cylinder notch about an eight of an inch. Cock it fast and it works perfect. I'm never going to shoot it so I've decided to let it go. I cleaned the inside and polished the parts that make contact with each other.
 

Attachments

  • 20240222_113353.jpg
    20240222_113353.jpg
    2.6 MB
  • 20240206_082846.jpg
    20240206_082846.jpg
    2.5 MB
  • 20240206_082939.jpg
    20240206_082939.jpg
    2.3 MB
  • 20240206_082935.jpg
    20240206_082935.jpg
    2.4 MB
  • 20240206_082931.jpg
    20240206_082931.jpg
    2.5 MB
  • 20240206_082927.jpg
    20240206_082927.jpg
    2.6 MB
  • 20240206_082918.jpg
    20240206_082918.jpg
    2.4 MB
  • 20240206_082915.jpg
    20240206_082915.jpg
    2.6 MB
  • 20240206_082911.jpg
    20240206_082911.jpg
    2.5 MB
  • 20240206_082906.jpg
    20240206_082906.jpg
    2.4 MB
Last edited:
I have one and mine is stainless steel. I’m not sure if euroarms made any in nickel.
Yeah I figure it's stainless steel. But you know people. Had one person ask me if a magnet sticks to it. I told em yeah. Then they said it's not stainless steel, stainless steel does not attract a magnet. They also stated that Euroarms called it "French Grey" Ok then. I appreciate your info. Left it at that..
 
Last edited:
Yeah I figure it's stainless steel. But you know people. Had one person ask me if a magnet sticks to it. I told em yeah. Then they said it's not stainless steel, stainless steel does not attract a magnet. They also stated that Euroarms called it "French Grey" Ok then. I appreciate your info. Left it at that..
I'm pretty sure it's stainless as well. I've had a few stainless guns and magnets lightly stuck to the barrel and cylinder respectively.
But when dealing with the public better safe then sorry
 
Status
Not open for further replies.
Back
Top