• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Ruger Old Army .44 black powder revolver, stainless steel, 7.5" barrel, adjustable target sight

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
The ROA can use either #11 or #10 caps. The CCI #11 Magnum caps are the identical inside diameter as Remington #10, and shorter -- see the below chart for detail.

I haven't found any noticable difference in shooting performance between CCI 10, CCI 11, CCI 11M, or Remington 10 , although if chrono'ed, I imagine the magnum caps may provide a small additional FPS "kick." Nothing noticable without measuring instruments in my experience, however.

I buy whichever is available and blast away! :)

Greg

CapInside diameterHeightInternal Height
CCI No.10.161’’0.163.112’’
CCI No.11.166’’0.165.113’’
CCI No.11 Magnum.166’’0.165.113’’
Remington No.10.166’’0.181.144’’
Remington No.11.166’’0.152.115’’
RWS 1075 No.11.165’’0.160.114
RWS 1055 No.11.158’’0.20.112
Thank you for posting this. You've confirmed that my RWS caps are too small for my particular nipple. Rem's fit just fine.
 
I’ve got a 5” - and to the buyer.. These are exceptional handguns. You’ll enjoy the 7.5” target site model 👍
 
Last edited:
Status
Not open for further replies.
Back
Top