Skinner peep sight.

[boker]

Looks like skinner offers a peep for the T/C renegade.

Anyone ever tried one?

 

[Bad Karma]

Yes, they work just as intended. Very well…

 

[Dixieshedhunter]

Here's one on a Tree Hawk. This is the Lo-Pro. Pretty sure the threads are 6-48. Adjustment in the front sight, drift and file.

Pete Davis

 

[user 48679]

Pretty sure the threads are 6-48.


When I ordered mine, I was told I could specify the stem thread as a custom order @ no extra charge

 

[boker]

Here's one on a Tree Hawk. This is the Lo-Pro. Pretty sure the threads are 6-48. Adjustment in the front sight, drift and file.


View attachment 168433

View attachment 168434View attachment 168435
Pete Davis

Love that muzzleloader.

 

[Ballshooter]

I have a few this one is on my 1861 Cook and Brother carbine love them!

 

[Christophero]

I have on on the Marlin 1895 CB. Very accurate even with the large aperture. I'll look into this for some of the muzzleloaders. Thanks for posting.

 

[Dave Markowitz]

Thanks for posting this. I sent a link to the sight to a friend of mine who's having increasing difficulties using open rear sights. He has the ability to D&T his gun for it.

 

[Winchester97]

I have one on my Renegade, screws right into the rear sight holes, I found being a bit far out on the barrel really had no ill effect on accuracy, in addition it's attatched to the barrel, so can't shift POI like a reciever sight can. I love mine.

 

[Travis186]

I've used a ton of them, and have one on my renegade as well. Works best with the aperture removed being so far ahead, but it's light years ahead of the factory TC sight. I thinned out the front to a point as well.

 

[jammingator]

Looking at the barrel mount for my Renegade - any adjustment needed for the stock front sight height?

 

[Winchester97]

Looking at the barrel mount for my Renegade - any adjustment needed for the stock front sight height?

I had a taller replacement with a fine bead for the front sight. It would help by going with a smaller bead over the stock sight anyway. I'll also agree that the aperature needs to be removed for hunting purposes for a good sight picture on these.

 

[jammingator]

Thanks for the feedback. I think I'm going to go ahead and order one. I'd been thinking more about a TC tang sight but the barrel mount is about half the price and seems more natural to the rifle and maybe to my eyes.

 

[jammingator]

Ok, so just ordered the barrel mount Thompson Center and - after seeing it on some other threads - the rear mounted Lo-Pro LO-Pro Sight as I have a couple of Renegades to set up. Got both for less than one TC tang sight!

 

[Bad Karma]

For a hunting rifle which is used with one specific load over most of its life they’re just about ideal. Get the windage and elevation dialed in, lock them down and you should be good to go.