• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Skychief in the underhammer

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Feb 8, 2010
Messages
301
Reaction score
277
Have been wanting to test the skychief load in my custom 12ga underhammer shotgun. Got a break in the weather today so off to the range. My load consisted of 90 grn volume of blackmz and 1 1/2 oz copper plated #6 the load was followed as described by Skychief. Shooting was at 25 yards. I counted 104 hits inside a 10 inch circle. Am I getting close? I used the MZ powder just for giggles. I normally shoot Swiss.
 

Attachments

  • 285EFC18-0FAF-4CC6-BAB7-023129ABD6FF.jpeg
    285EFC18-0FAF-4CC6-BAB7-023129ABD6FF.jpeg
    139.5 KB
  • CB75C9B9-D71E-44D4-B56E-8DC69EDC1A82.jpeg
    CB75C9B9-D71E-44D4-B56E-8DC69EDC1A82.jpeg
    59.9 KB
Looks like you have greater pattern density to the right of the black rectangle. If you shift your circle over to encompass the greatest density, what is your percentage?
 
My gun shot low and left when I got it...

After a little tweaking, things are lined up now.😁
Mines not an under hammer however..
But I own a .36 Hopkins Allen under hammer .

Great looking gun you’ve got there, and a Turkey killer it appears! Congrats
 
Back
Top