This is what I'm talking about, thank you.
Small Shot Charges To Grains Equivalents
- Thread starter Walkabout
- Start date
Help Support Muzzleloading Forum:
@Grenadier1758 I am using schuetzen 1fg in my pedersoli 10ga SxS
1 5/8 scoop schuetzen Fg
1 1/2 scoop #6 lead shot
This is the pattern I achieve last weekend with the @Skychief loading method
25 yards out of the right/cylinder bore barrel
1 5/8 scoop schuetzen Fg
1 1/2 scoop #6 lead shot
This is the pattern I achieve last weekend with the @Skychief loading method
25 yards out of the right/cylinder bore barrel
Attachments
Last edited:
- Joined
- Aug 6, 2005
- Messages
- 7,094
- Reaction score
- 5,386
All the shot flasks/bags I've ever seen measure in drams.
- Joined
- Aug 15, 2010
- Messages
- 5,353
- Reaction score
- 5,106
I believe he's wanting to use his powder measurer to throw shot charges. Flasks and shot bags are as rare as hens teeth here. I've yet to see any at a trap shoot.
No, you are not wrong. But when you know the density of a material, that density can be used to determine the weight of an object by multiplying the volume by the density to determine weight.
120 grains weight of powder takes up a volume of 0.484 in^3.
1 5/8 ounces of lead shot takes up a volume of 0.484 in^3 based on the density of lead shot.
Hey @Walkabout Hope this works.
For smaller gauges, this fellow has it right-
@Eterry said-
I'm guessing this is for a smoothbore muzzleloader. If your match shooting you might want to weigh your charges...
Otherwise,
3/8 oz=25grs black powder measure
1/2 oz=35grs black powder measure
5/8 oz= 45grs black powder measure.
These aren't precise, but using a volume measurer you can't get 1/2 grain increments. Remember, black powder is no where near as sensitive as smokeless.
I know firsthand how confusing volume to weight measurements can be.
At a trap match I watched a shooter use an 8 bore. He used 140grs ffg and 2oz (by volume) of shot, using the same measurer
I was ready to argue that he would only get 8 shots from a pound of powder, because he was using 2 scoops of shot, by volume, and 2 scoops of powder, by volume
After i settled down and thought about it, it became clear he got 50 shots (approximately) from a pound.
For smaller gauges, this fellow has it right-
@Eterry said-
I'm guessing this is for a smoothbore muzzleloader. If your match shooting you might want to weigh your charges...
Otherwise,
3/8 oz=25grs black powder measure
1/2 oz=35grs black powder measure
5/8 oz= 45grs black powder measure.
These aren't precise, but using a volume measurer you can't get 1/2 grain increments. Remember, black powder is no where near as sensitive as smokeless.
I know firsthand how confusing volume to weight measurements can be.
At a trap match I watched a shooter use an 8 bore. He used 140grs ffg and 2oz (by volume) of shot, using the same measurer
I was ready to argue that he would only get 8 shots from a pound of powder, because he was using 2 scoops of shot, by volume, and 2 scoops of powder, by volume
After i settled down and thought about it, it became clear he got 50 shots (approximately) from a pound.
You are correct, shot is measured by weight, but dispensed by volume.
I have been working extensively with 28 and 24 gauges. I find they respond best to a 7/8 oz scoop of powder with the same scoop of shot. Less powder, inconsistent patterns and more powder, poor patterns. Similarly, 3/4 oz of shot was my goal but neither gauge (3 guns) is "better" with that amount of shot and any amount of powder.
