• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Smoked Fish Cheese

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Apr 18, 2017
Messages
1,370
Reaction score
562
Location
Med Hat Ab
Yesterday did a Smoking session.

Salted (Dry Pick Salt) Haddock and Salmon, then one day water soak to remove salt. Still was a bit salty as is for me so next time two day soak.
Dry for two days then coat with Maple Syrup, dry for two days.

Cherry/Alder wood used.

Regular cheddar got a little warm and dripped a bit.

Overall great result. Cheese I let age for three weeks for the smoke to integrate.

IMG_8733_CheeseFishSmoker-1000.jpg

IMG_8738_CheeseFishSmoker-1000.jpg

IMG_8744_Smoker-800.jpg

IMG_8755_CheeseFishSmoker-1000.jpg

IMG_8754_CheeseFishSmoker-1000.jpg

IMG_8766_CheeseFishSmoker-1000.jpg

IMG_8765_CheeseFishSmoker-1200.jpg
 
Yesterday did a Smoking session.

Salted (Dry Pick Salt) Haddock and Salmon, then one day water soak to remove salt. Still was a bit salty as is for me so next time two day soak.
Dry for two days then coat with Maple Syrup, dry for two days.

Cherry/Alder wood used.

Regular cheddar got a little warm and dripped a bit.

Overall great result. Cheese I let age for three weeks for the smoke to integrate.

View attachment 360004
View attachment 360005
View attachment 360006
View attachment 360007
View attachment 360008
View attachment 360009
View attachment 360010
Great job. I also had problems smoking Guda cheese. The lowest temp setting on my Pitboss is 200F and the cheese looked just like your photo. I may try again by doing it in several short stages and removing it before it gets too hot.
 
I like to heat Velveta cheese to soften it and add some smoked salmon and finely chopped pickled jalapenos and give it a good mix then age it for a few days. It's hard to beat it on a Ritz cracker. Alder is not poisonous. The bark will give a bitter flavor if it's not removed.
 
I like to heat Velveta cheese to soften it and add some smoked salmon and finely chopped pickled jalapenos and give it a good mix then age it for a few days. It's hard to beat it on a Ritz cracker. Alder is not poisonous. The bark will give a bitter flavor if it's not removed.
I was joking about Alder being poisonous. Though I do enjoy earthy smoke like oak more.
 
Great job. I also had problems smoking Guda cheese. The lowest temp setting on my Pitboss is 200F and the cheese looked just like your photo. I may try again by doing it in several short stages and removing it before it gets too hot.
People fill a tray with ice below the cheese to keep the temp low. I didn't have the room for that lol.
I took it out after an hour, technically 30 min should be enough. Chamber temp was 150f at the time of removal.
Also depends on the cheese melting temps.
 
People fill a tray with ice below the cheese to keep the temp low. I didn't have the room for that lol.
I took it out after an hour, technically 30 min should be enough. Chamber temp was 150f at the time of removal.
Also depends on the cheese melting temps.
Thanks. I'll try that.
 
Looks good, little to warm but it’ll eat!
Little advice if you want, cheese is only a cold smoke item and my personal rule is always have room for a pan of ice to help keep the temperature below 70 degrees. Even if you have to do it all in batches. When I do cheese nothing else is going in with it so if it does sweat it won’t drip on other foods. Alder is my favorite cold smoking wood for cheese, fish, dried beans, rice and salt.
Here in SW Missouri I only run cheese in the fall and winter when it’s cooler just so I’m not fighting the outside temperature as well.
Just my unasked for 2 cents……
 
Am I alone in thinking that,,,,

View attachment 360285

At a quick 1st glance, this looks like someone in a matchcoat facing his right, cradling a longrifle?

🤣
LOL, yup, I saw it after wrapping the tree. Was going to put eyes in with a marker. The Head is perfect, I think "Nightmare Before Christmas" was a character that looked like that.
 
Back
Top