Robert Egler
50 Cal.
- Joined
- Jul 17, 2007
- Messages
- 1,319
- Reaction score
- 26
I tan them myself.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Squirrel Hide Usage?
- Thread starter tryinhard
- Start date
Help Support Muzzleloading Forum:
Woods Dweller
45 Cal.
- Joined
- Nov 28, 2009
- Messages
- 642
- Reaction score
- 1
Squirrel is very tough, It has been used for bow string for a very long time. My Son makes bows and uses squirrel skins for the strings. It also works very well for Moccasin shoe string.
After squirrel is skinned and hair is take off let it dry out like rawhide. Start cutting around the hide in a circle making a string about 1/4”. Now, soak string in water till it's floppy. Tie one end to something stationery and start twisting string till it's all tightly twisted and stretched out. Now tie the end to something that is going to hold it in place and streched out, allow it to dry. There ya have a very strong bow string. Or what ever you want to use it for.
You can do the same thing with soft buckskin to make a nice buckskin thread. I wax buckskin thread after it's dry. I have made 40 foot buckskin thread and braided 3 together to make a 40 foot rope.
After squirrel is skinned and hair is take off let it dry out like rawhide. Start cutting around the hide in a circle making a string about 1/4”. Now, soak string in water till it's floppy. Tie one end to something stationery and start twisting string till it's all tightly twisted and stretched out. Now tie the end to something that is going to hold it in place and streched out, allow it to dry. There ya have a very strong bow string. Or what ever you want to use it for.
You can do the same thing with soft buckskin to make a nice buckskin thread. I wax buckskin thread after it's dry. I have made 40 foot buckskin thread and braided 3 together to make a 40 foot rope.
Woods Dweller
45 Cal.
- Joined
- Nov 28, 2009
- Messages
- 642
- Reaction score
- 1
Wet the hid, rub hardwood ash into hair, roll up and let sit for 2 or 3 days. Hair should just pull out.
Woods Dweller
45 Cal.
- Joined
- Nov 28, 2009
- Messages
- 642
- Reaction score
- 1
Never have tryed that, but it sounds like a good inea. Good luck :thumbsup:
Veritas!
Last edited by a moderator:
Sam squanch
69 Cal.
- Joined
- Oct 9, 2019
- Messages
- 3,169
- Reaction score
- 4,523
Make some squirrel hide underwear….
appalichian hunter
75 Cal.
- Joined
- Oct 28, 2018
- Messages
- 5,828
- Reaction score
- 9,476
fur side in of course.
- Joined
- Jan 27, 2004
- Messages
- 1,715
- Reaction score
- 526
I use pine squirrel strips for tying flies.
My dog would eat them before I could do anything with them. I figure win win.
I always just peeled the tail off the bone and slid it down on my truck antenna.
Just remember, every animal has enough brains to tan itself,,,,
Just remember, every animal has enough brains to tan itself,,,,
Henry Miles
40 Cal
- Joined
- Jul 10, 2019
- Messages
- 372
- Reaction score
- 610
Hair removal with any raw hide can be accomplished with firepit ashes dissolved in water. Soak for a couple days and the hair will come right out in big globs Rinse well and tan that hide!
