• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

T/C Hawken Percussion Misfires

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
place a drop of red locktight into the screw hole and reinsert
Red locktite will lock the screws in place, almost impossible to remove unless heat is applied. Blue locktite works much more better. Screws won't work loose, and the screws can be removed with a little effort if necessary.
 
Up here in Alberta oil can be your downfall. When I was a kid I would use 3-1 oil until one cold november morning when the firing pin didn’t move on my rifle. Since then I oil things well but once the cold hits its time to break out the carb cleaner and remove all oils from the action, or in our world the lock.
Walk
 

Latest posts

Back
Top