Terry Lightle
40 Cal
- Joined
- Apr 16, 2019
- Messages
- 207
- Reaction score
- 220
Will Hawken and Renegade barrels interchange if the are same width across flats
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
TC QUESTION
- Thread starter Terry Lightle
- Start date
Help Support Muzzleloading Forum:
- Joined
- Mar 13, 2020
- Messages
- 7,380
- Reaction score
- 20,601
- Location
- On the Border in Idaho looking at BC
only difference as far as i know is the barrel lug spacing. but i could be wrong as i have not played with TC's for a while. Many here will know.
TechMoron
Blue Ridge Mtn. Hillbilly
- Joined
- Jun 20, 2018
- Messages
- 346
- Reaction score
- 473
Renegade barrels and 54 caliber TC Hawken barrels will interchange. Occasionally,due to TC's lack of quality control, the end of the under rib may either hit the end of the forearm or leave a slight gap. This can happen even if it's two Renegades or two Hawkens.
Only trying will tell you. I have a TC 'hawken' stock and a TC 'hawken' barrel I took off of another rifle. Tried to make a new rifle out of the two. It just wouldn't fit. 
Ditt44
36 Cl.
Yes. But no.
Renegade is a 1-inch barrel channel in your stock. No "Renegade" barrel will fit a standard Hawken stock (15/16-inch). All Renegades are 1-inch barrels, .50, .54, .56, .58 cals.
Hawken stocks are 15/16-inch barrel channel in both .45 and .50 cals.
Hawken stocks are 1-inch in a .54 cal. This barrel will fit a Renegade stock and will likely have a gap between the under rib and stock. A Renegade barrel will fit a .54 cal/1-inch Hawken stock but will likely require the under rib to be trimmed or it will not fit due to the brass nose cap.
Most wedge key slots for are long enough to allow some movement fore and back. Across all years and variations, you may find that the wedge on one barrel may not align with a particular stock. I would argue this might be true even with same variants. I have had wedge keys not want to fit in or have no tension at all and fall right out. You can work around most issues but pay attention to caliber and size/width.
Renegade is a 1-inch barrel channel in your stock. No "Renegade" barrel will fit a standard Hawken stock (15/16-inch). All Renegades are 1-inch barrels, .50, .54, .56, .58 cals.
Hawken stocks are 15/16-inch barrel channel in both .45 and .50 cals.
Hawken stocks are 1-inch in a .54 cal. This barrel will fit a Renegade stock and will likely have a gap between the under rib and stock. A Renegade barrel will fit a .54 cal/1-inch Hawken stock but will likely require the under rib to be trimmed or it will not fit due to the brass nose cap.
Most wedge key slots for are long enough to allow some movement fore and back. Across all years and variations, you may find that the wedge on one barrel may not align with a particular stock. I would argue this might be true even with same variants. I have had wedge keys not want to fit in or have no tension at all and fall right out. You can work around most issues but pay attention to caliber and size/width.
