Testing the Accuracy of .480's verses .490's in a 50 caliber flintlock...

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I use a .480 ball in my .50 longrifle, but use a felt wad under the patched ball. I use that combo for deer hunting because it’s a load that goes down easily without a short starter and using only the hickory ramrod. Yet, it groups just as well as a tight, patch only load that requires a short starter and range rod. My powder charge is 70 grains 2F swiss or Old Eyensford.
 
I have one .50 that shoots .480s and one that shoots .490s. My Tradition Frontier has a tight bore and likes .480s and my CVA plainsman likes .490s. The Tradition likes 60grs of 3F and the CVA likes 70grs of 3F.
 
This week, I get a little more serious.
I test the accuracy of .480 round balls verses .490's in a 50 caliber flintlock, enjoy:


When I built my Flintlock approx 25 years ago, I shot .490s over 50 grains of Goex, through a 36", 1" diameter, Green Mountain barrel.
Considering that it was the first one I built (actually built vs kit), and there were plenty of mistakes, it shot pretty well
 
One of the things I like about your videos is that you shoot like I do. If I can hit a gallon milk jug at thirty yards with a easy loading muzzleloader, I’m happy.
Absolutely!
I much prefer shooting milk jugs, still, bowling pins, etc verses paper and that's why I pour triple the number of .480's verses .490's. I seldom get involved with shooting matches preferring to shoot the above targets.
I leave that precision shooting to the professionals because I'm not much good at that.
I shoot for the thrill of pulling the trigger.

Hitting the target is just a bonus.
 

Latest posts

Back
Top