I am impressed by all the hand work he put into it. Apologies if the link has been posted before.
https://theliberalgunclub.com/making-a-14th-century-hand-gonne/
https://theliberalgunclub.com/making-a-14th-century-hand-gonne/
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
This guy really, really wanted a hand gonne
- Thread starter BillinOregon
- Start date
Help Support Muzzleloading Forum:
I had thought seriously about making one myself. But I wound up getting a decent deal and bought one at the time.
That was an impressive amount of work to make one. It turned out well too. I would have threaded the breechplug though. But otherwise it has that handmade approach that was actually used with it.
That was an impressive amount of work to make one. It turned out well too. I would have threaded the breechplug though. But otherwise it has that handmade approach that was actually used with it.
Last edited:
Wow! That's a lot of work for sure. I don't have a real problem with the pinned breech but I would have used more or larger ones.
- Joined
- Sep 16, 2019
- Messages
- 208
- Reaction score
- 237
That is pretty neat and really took a good deal of time and hand work - he has every right to be proud! I enjoyed seeing the pinned breech plug - looked like a fairly permanent attachment with the countersunk riveted steel pins (and the epoxied linstock behind the breech). I might have also run some solder around the plug just to minimize gas blow back etc. Thanks for posting the linked article!
Here is a very simple hand cannon I made.....just to make it....like I say simple but with the "s curve'' to make firing easier.
Now that is pretty doggone slick. Nice work!
