• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Thompson Center renegade barrel size 50 cal

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
If it's a Renegade, I'm sure it would be 1" regardless of caliber. As far as I know, they only cut one size of barrel channel in the Renegade stocks.

Notchy Bob
 
The T/C Renegade will have a 1" across the flats barrel in both calibers.

The T/C Hawken used a 15/16" barrel for calibers up to 50.
The T/C Hawken used 1" barrels for its 54 caliber rifle.
 
All Renegades had one inch barrels.

45 & 50 cal Hawkens and White Mountain Carbines had 15/16ths.

54 & 58 cal Hawkens and 54 cal White Mountains had one inch barrels.

Green Mountain barrels cause some confusion as you’ll see a Hawken listed as 54 cal and in Green Mountains it can be either 15/16ths or one inch.
 
I have a t/c big boar 58 and it is a 1" channel however has single trigger,shorter length of pull,no sow belly on fore end and is very different stock than a 50 renegade that I have with double triggers
 

Latest posts

Back
Top