I have parts kit with just the stocks bbl. n tang inletted. What size chisels/Gouges would i need to inlet the lock mortice n the trigger. Is there a certain brand that are decent without having to get a loan ?
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Tools needed ?
- Thread starter smokepolehall
- Start date
Help Support Muzzleloading Forum:
Phil Coffins
69 Cal.
Here’s all the chisels I use to build from scratch and most of the files to shape one.
IMG_0250 by Oliver Sudden, on Flickr
IMG_0215 by Oliver Sudden, on Flickr
IMG_0250 by Oliver Sudden, on Flickr
IMG_0215 by Oliver Sudden, on FlickrSidney Smith
58 Cal.
- Joined
- Feb 17, 2019
- Messages
- 2,205
- Reaction score
- 2,312
Looks like you've got things covered already. I've inletted locks with a lot less than what you've got.
The only chisel I'd recommend you get is the one with the bent shaft, 1/8 wide, so you can get inside the mortise and still make precise flush cuts.
The only chisel I'd recommend you get is the one with the bent shaft, 1/8 wide, so you can get inside the mortise and still make precise flush cuts.
