forrest-hunter
Pilgrim
- Joined
- Dec 2, 2008
- Messages
- 7
- Reaction score
- 2
Anyone know diameter and length for replacement ramrod
Traditions Deerhunter
- Thread starter forrest-hunter
- Start date
Help Support Muzzleloading Forum:
Not sure this helps Forrest, but I think the Deerhunter is pretty close in dimensions and thimbles to their Woodsman I own. 28" barrels, I think.
Its ramrod's total length is 27 5/16" with a brass ball driver on one end and a fitting for a jag, ball remover etc. on the other.
I mic'd its diameter at .351", so somewhere around 11/32". It may nominally be called 3/8". I think Track of the Wolf has a variety of replacements. The delron ones will feel like spaghetti, but don't break generally. I only use mine when hunting. I have a stainless steal range rod from Track or RMC Ox-Yoke that is best for plinking. Good luck. SW
Its ramrod's total length is 27 5/16" with a brass ball driver on one end and a fitting for a jag, ball remover etc. on the other.
I mic'd its diameter at .351", so somewhere around 11/32". It may nominally be called 3/8". I think Track of the Wolf has a variety of replacements. The delron ones will feel like spaghetti, but don't break generally. I only use mine when hunting. I have a stainless steal range rod from Track or RMC Ox-Yoke that is best for plinking. Good luck. SW
Traditions also [I think] makes a fiberglass rod that can be cut to length. It may come with the fittings. make sure you pin them if you go that route. SW
longcruise
70 Cal.
The deerhunter has a 24" barrel. A24" rod should work.
