Traditions flintlock Kentucky long rifle kit

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 24, 2019
Messages
20
Reaction score
6
I’m throwing around getting a long rifle kit next summer depending on how much my taxes hit me and I like the price point of the traditions flintlock Kentucky long rifle kit. I currently have the hawken woodsman and it’s extremely accurate out to 100yds, maybe further as I’ve only shot out to 100 with it, and I don’t mind that they are a little cheaper built. What I did notice is that I can only find a kit with a single trigger. I personally prefer the double trigger and dug into it a bit more and saw that the percussion kit of the same Kentucky long rifle has a deluxe model with the double triggers. My main question is does a double trigger kit exist for the traditions? Even looking at some pedersoli kits close to 1000 dollars they only have a single trigger. If a double trigger flintlock Kentucky long rifle isn’t made by traditions, are there any other similar flintlock kits (pa long rifle, Kentucky long rifle, Tennessee long rifle) in that 550-650 range?
 
The Gun Works sells a fly and a tumbler that will accept the fly. You could change it out if you wanted.

With a little work though, the single trigger can be pretty smooth. Mine does like to be well greased. Oiling it doesn't seem to work as good as grease. I took mine apart and polished all wear surfaces and that helped tremendously.
 
The Gun Works sells a fly and a tumbler that will accept the fly. You could change it out if you wanted.

With a little work though, the single trigger can be pretty smooth. Mine does like to be well greased. Oiling it doesn't seem to work as good as grease. I took mine apart and polished all wear surfaces and that helped tremendously.
I even wondered if it’s the same lockset and triggers that is in the hawken. Apparently a single trigger on a Kentucky isn’t totally un period correct, the idea of it just bugs me a bit. Might have to get over it though
 
I wanted to do a set of double son mine but it seems like it was going to be more than my capabilities so I took the lock apart, polished with 800, 1000 then 1500 sand paper. Then I used polishing compound d on my dremmel and buffed all wearing surfaces. This seemed to help a lot. It's not a hair trigger but it's not like trying to lift a brick with your finger either. For me it's about perfect.
 
Traditions don't supply the greatest locks. Pedersoli has a Kentucky-style rifle with a double set trigger like you want. However, when you get into that price point, you're also in the same price point as a Kibler Southern Mountain Rifle kit, which is a whole world above the Pedersoli, as I have an example of both, and can compare them directly.
 
I’m throwing around getting a long rifle kit next summer depending on how much my taxes hit me and I like the price point of the traditions flintlock Kentucky long rifle kit. I currently have the hawken woodsman and it’s extremely accurate out to 100yds, maybe further as I’ve only shot out to 100 with it, and I don’t mind that they are a little cheaper built. What I did notice is that I can only find a kit with a single trigger. I personally prefer the double trigger and dug into it a bit more and saw that the percussion kit of the same Kentucky long rifle has a deluxe model with the double triggers. My main question is does a double trigger kit exist for the traditions? Even looking at some pedersoli kits close to 1000 dollars they only have a single trigger. If a double trigger flintlock Kentucky long rifle isn’t made by traditions, are there any other similar flintlock kits (pa long rifle, Kentucky long rifle, Tennessee long rifle) in that 550-650 range?
I’ve looked at that same rifle. I think it would be a good a good gateway into the flinter world. Personally, I like traditions rifles. I have several and they have treated me well. I have other brands as well, but I appreciate the learning experience those rifles have given me.

Anthony
 
The Traditions Deluxe Ky rifle has set triggers, and is available as a flintlock. Don't know if it's available as a kit, but there's so much wood that can be trimmed from the stock, you can make that into a project/kit all by itself.
 
Apparently a single trigger on a Kentucky isn’t totally un period correct, the idea of it just bugs me a bit. Might have to get over it though
Personally not a fan of the Traditions Kentucky Flintlock, but a lot of people seem to enjoy these guns for what they are. If things with it bugs you, maybe time to move up to a higher price point. Plenty of options.
 
Personally not a fan of the Traditions Kentucky Flintlock, but a lot of people seem to enjoy these guns for what they are. If things with it bugs you, maybe time to move up to a higher price point. Plenty of options.
Honestly I can’t afford anything more than the traditions. I’ve looked at the totw and Kibler kits, the totw kits all use lr locks which aren’t bad but they seem to be just a high end production lock from what I have seen on my friends kits from there. The kibler kits look like they have a nicer lock but I cannot justify paying 900 for a chunk of wood, and a separate 315 on a lock. It’s absurd what some of the kits cost imo. What would be cool is if someone had a Dixie gun works kit laying around for sale cheap but I haven’t seen any of those in years
 
Traditions guns are junk.
I’ve got to disagree, my current one is a hawken woodsman and I am currently more accurate than the 1500 dollar custom flinters the rest of my group use. They run a smaller pan and they don’t like English flints, but a good cut agate flint and a minimal amount of pan powder and it goes off almost instantly every time. The triggers are not as nice as a custom gun out of the box but it’s a completely different price point and mass produced as well and they are still crisp and predictable
 
Honestly I can’t afford anything more than the traditions. I’ve looked at the totw and Kibler kits, the totw kits all use lr locks which aren’t bad but they seem to be just a high end production lock from what I have seen on my friends kits from there. The kibler kits look like they have a nicer lock but I cannot justify paying 900 for a chunk of wood, and a separate 315 on a lock. It’s absurd what some of the kits cost imo. What would be cool is if someone had a Dixie gun works kit laying around for sale cheap but I haven’t seen any of those in years
My point was to enjoy the Traditions Kentucky for what it is, and don’t worry about making it something it isn’t. Simply put, it can be serviceable as is. Pour all the money you want into upgrading a Traditions and it is still a Traditions. If that makes you happy, great. If you want something more….
 
My point was to enjoy the Traditions Kentucky for what it is, and don’t worry about making it something it isn’t. Simply put, it can be serviceable as is. Pour all the money you want into upgrading a Traditions and it is still a Traditions. If that makes you happy, great. If you want something more….
Yeah, I totally get what you mean. At this point too I’m still not decided on what I want to do either. Maybe once summer comes around and demand eases up a bit more stuff will pop up as well
 
The Gun Works sells a fly and a tumbler that will accept the fly. You could change it out if you wanted.

With a little work though, the single trigger can be pretty smooth. Mine does like to be well greased. Oiling it doesn't seem to work as good as grease. I took mine apart and polished all wear surfaces and that helped tremendously.
Would you happen to have a link to those parts? Looking around all I can find is a fly. The more I think about it, it should be relatively inexpensive to swap those parts out and put in a fly and trigger kit. It appears if I read some older posts right the locks between the single trigger Kentucky and the deluxe model are identical with the exception of a fly but I may have misunderstood.
 
Back
Top