trigger guard help

[oldhunter1954]

My first time doing a stock on my own. The stock and the furniture is from Pecatonica River Long Rifle Supply. Pecatonica inletted for the barrel and the lock. Please look at the trigger guard. This is how it is shown on their website. Now that I have inletted for it it seems that it is backwards. If it is I will be very sad and have to fix a hole in the Walnut stock.
Thanks for helping the new guys.

 

[M1ashooter]

Just my thoughts. The trigger guard is running the correct way, but it appears it should be back more.

 

[martin9]

That looks good just make sure the rear of the bow doesn't interfere with the trigger. If it does file it a little and you're good to go.

 

[ord sgt]

The trigger guard can be bent slightly to conform the the shape of the stock. Bend it slowly. It will hide the gap at the front edge of the guard.

 

[excess650]

How is the trigger pull? I ask because if there is a lot of movement (creep) in a light trigger pull, the trigger assembly could go forward and change the leverage.

 

[oldhunter1954]

Just my thoughts. The trigger guard is running the correct way, but it appears it should be back more.

Thanks. I move it back as far as I could. I might have to file it as martin9 suggested.

 

[smo]

If anything file a little off the bottom of the trigger itself and that should take care of any clearance issue.

 

[oldhunter1954]

How is the trigger pull? I ask because if there is a lot of movement (creep) in a light trigger pull, the trigger assembly could go forward and change the leverage.

As shipped the trigger is tight. Almost no movement at all. They told me I will need to file it as needed.