trigger issue

on my .50 traditions kentucky kit rifle the trigger has about a 1/4" of play that rattles when moved. is there any way to silence this?

 

[WRussell]

From a nice neat spring, or removing the slop by better fitting to a quick & dirty: poke a piece of soft foam into the slot ahead of the trigger.

What's the traditional way? I'm curious.

 

[TANSTAAFL]

What's the traditional way? I'm curious. [/quote]

Fit is traditional.

If me, I would hard solder a piece of same thickness (with more height than required) stock onto top of trigger bar, then file to correct height.

 

What's the traditional way? I'm curious.

Fit is traditional.

If me, I would hard solder a piece of same thickness (with more height than required) stock onto top of trigger bar, then file to correct height. [/quote]I did something similar to my CVA Kentucky pistol , with JB weld . I built it up about 1/4" higher with the JB weld and then filed it down until it worked correctly . I've shot it over 100 times since then , and it's still holding .