I sent the lock off my fowler to TVM today for repair. I thought I would pull the pins , remove the barell and check every thing out while the lock is gone. I discovered that one of the under lugs had come off.When I built the gun I remember soldering the lugs on. I used propane to do the job and I didnt feel I got enough heat to properly solder the lug on the gun barrel but it felt strong enough at the time so I went with it. I'm thinking about useing oxy/ac to do the repair on the lug.
My question is. How much heat will the barrel take before it is damaged ?
Any advice on this little job would be apreciated.
Thanks,Wayne
My question is. How much heat will the barrel take before it is damaged ?
Any advice on this little job would be apreciated.
Thanks,Wayne