hoping someone may have a 3/4x16 breach plug for an H&A underhammer? I have a 20in 20ga barrel that will make a perfect companion to the .45 buggy rifle barrel it has now! Thanks in advance. bluemule66
-
If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
WANTED underhammer breach plug
- Thread starter bluemule66
- Start date
Help Support Muzzleloading Forum:
- Joined
- Feb 11, 2022
- Messages
- 1,742
- Reaction score
- 3,712
Use a bolt with the same size thread. Make certain the threaded end of the bolt has a good square face to where it seats against the inside shoulder of the barrel. Screw it into the barrel and cut the bolt head off to proper length.
Last edited:
