Was Dutch right about wiping between shots?

[tenngun]

I no doubt will catch flak for this but I blow down the barrel before loading
As some see a danger in putting you mouth over an empty gun some folks ape-ah fecal matter over this.
There are several ways of doing this that don’t involve kissing the muzzle.
The big advantage of this is that solid whoosh of air out the touch hole
It’s good and clear now at this point.

 

[French Colonial]

I no doubt will catch flak for this but I blow down the barrel before loading
As some see a danger in putting you mouth over an empty gun some folks ape-ah fecal matter over this.
There are several ways of doing this that don’t involve kissing the muzzle.
The big advantage of this is that solid whoosh of air out the touch hole
It’s good and clear now at this point.

I was taught to blow down the barrel back in the 70's when I first started, every one of my mentors did it.
I kept doing it when I got heavily into BPCRS albeit through a blow tube, somewhere in the last few years there was a switch by some afraid they would blow their face off so they wanted the rest of us to stop doing it as well.

Nervous nannies....

 

[Dark Angel]

Once went to a rifle range with a friend to try a new rifle (not BP but cartridge) I had bought. Saw a man there firing a flintlock. He swabbed his bore between shots, and I couldn't understand why. This friend of mine had at the time been hunting and shooting competition with muzzleloaders for almost 30 years. He just shook his head and laughed. When i asked him why he was laughing, he told me that it was 'just plain stupid' and the man didn't know 'squat' about muzzleloaders as swabbing after each shot was a waste of effort. I had/have to bow to his knowledge about such things as my sole experience with BP is C&B revolvers.

 

[COTNTOP]

My shooting partner and I started wiping with T17 between each shot and our groups tightened up considerably. Now our groups look like some of those I see on this forum. We also bought Muzzleloader Original pre-lubed patches that fell right in with this style of shooting. I was probably doing everything wrong before, this sure helped us.

 

[I Did It Again]

I was taught to blow down the barrel back in the 70's when I first started, every one of my mentors did it.
I kept doing it when I got heavily into BPCRS albeit through a blow tube, somewhere in the last few years there was a switch by some afraid they would blow their face off so they wanted the rest of us to stop doing it as well.

Nervous nannies....

I was too. My Hawken .54 caplock was hand built for me in ‘75 by an old man who has long since gone under but that is what he recommended when he turned the rifle over to me. I followed the practice after every shot right up until I joined a local club a very short few years ago. Had to stop to keep the peace at all the local rendezvous’ but still practice that method when I am on my own.

 

[tenngun]

Once went to a rifle range with a friend to try a new rifle (not BP but cartridge) I had bought. Saw a man there firing a flintlock. He swabbed his bore between shots, and I couldn't understand why. This friend of mine had at the time been hunting and shooting competition with muzzleloaders for almost 30 years. He just shook his head and laughed. When i asked him why he was laughing, he told me that it was 'just plain stupid' and the man didn't know 'squat' about muzzleloaders as swabbing after each shot was a waste of effort. I had/have to bow to his knowledge about such things as my sole experience with BP is C&B revolvers.

Black powder residue is effected by humidity
I grew up in New Mexico and often shot ten or twenty shots without a wipe
Then in California when in the navy did the same.
Then moving to Arkansas ran in to high humidity. Four or five shots the round would start getting too tight to load easily after four or five shots
Spit patch helped, but a ‘cake’ would form pretty quick
A few years ago I tried some speed shooting with paper cartridges, I got off loads on an average of eighteen seconds for ten shots. But even at the end the ball, wad combo got hard to run down, a .575 in a .62.
A wipe between shots prevented any hard loading for me.
It’s just easy. Ml is a slow-take-your-time sport
And twenty shots is a afternoon at the range for me
In October I was at an even, and was shooting smooth bore, and did load about ten shots before I swabed. It was pretty humid and shooting a bare ball I still had to push that ball down after five shots
Swabing between shots just cost you nothing and prevents ever having a load to tight to ram home.

 

[JDBraddy]

Glad I read through this thread. I shoot a T/C. Have been using the Dutch method, dry lubed patch, wiping between shots.

Shot a fun match this weekend that requires loading from the pouch, someone here had suggested eliminating the little spray bottle from my kit in favor of a tin of pre-dampened wiping patches. I had four misfires during the match. Though I must have gotten the patches too wet, but now realize I also thought tighter was better for cleaning patches.

So when I had used up the cheap cleaning patches I had bought, I cut up a torn heavy flannel shirt that is much thicker, and fits quite snuggly over my jag. Think I must have been pushing the debris down to the breech.

I had also previously tried the dawn/water thing, but apparently was doing it wrong. I was using it on cleaning patch to wipe between shots, not as a lube on the loading patch. May have to give it another try.