• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD weeping heart tomahawk

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
May 26, 2011
Messages
20,077
Reaction score
6,981
Location
Arkansas Ozarks
This t'hawk is identical to the regular hawk except for the pierced weeping heart. Like others similar, I believe it to be from India and is cast steel. Some vendors represent these as hand forged. It is my opinion they are not forged. But, still good 'hawks that can be used for general purpose or throwing. The heart in the pic dosen't show well but it is a heart.
$20.00 plus shipping. I ship only to the U.S. and will accept personal checks.
weeping heart hawk.JPG
 
This t'hawk is identical to the regular hawk except for the pierced weeping heart. Like others similar, I believe it to be from India and is cast steel. Some vendors represent these as hand forged. It is my opinion they are not forged. But, still good 'hawks that can be used for general purpose or throwing. The heart in the pic dosen't show well but it is a heart.
$20.00 plus shipping. I ship only to the U.S. and will accept personal checks.
View attachment 149699
It’s easy enough to tell if something is hand forged—I should add that most mass produced “antiquated” weapons like this are still hand forged, just using modern techniques and tools, as opposed to being produced via machines on a production line like a gerber knife, for example.

Being whacked out by someone on an anvil and a coke forge, though… perhaps not, but it’s the fashion most mass-produced “genuine” nepalese poor-quality kukris are made, even today, so it’s not impossible!

Just my two cents, sorry to interrupt.
 
Status
Not open for further replies.
Back
Top