• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Weighing (lead) balls

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
wasting your time, sorting them out like that.
When I have seen a 3" difference in ball impact at 50 yards with balls that are 3 grains heavy or lighter that the average I consider that significant even for deer hunting purposes. I know that human error comes into play, but I would hate to wound a deer due to a ball that does not shoot to the point of aim.
 
When I have seen a 3" difference in ball impact at 50 yards with balls that are 3 grains heavy or lighter that the average I consider that significant even for deer hunting purposes. I know that human error comes into play, but I would hate to wound a deer due to a ball that does not shoot to the point of aim.
Human error is exactly what that difference is, it's not because they are 3 grains +/- especially at only 50 yards.
 
Last edited:
Way back in the 1960s i weighed round balls. My mentor, who won most of the muzzleloader matches he entered, attempted to convey to me that weighting round balls was a waste of time. i finally figured it out: Yep, it's a waste of time.
 
I have weighed my lead balls and two separate brands weighed an average of 226 grains? My question is when I was organizing my B.P. equipment I found a .54 ball 330Diameter ball mould by Thompson/Center that I have had forever and never used? I glanced at the box and it had the weight of the balls as being 230 grains? Which is correct for a pure lead ball, both can't be right?
 
I have two Callahan bag molds.....that I've used exactly once. Bought for the "just because they're cool" factor. The one time I used them, it was over campfire coals using a ladle.

Obviously this ain't the efficient way to cast lots of balls. If I want to start casting my own, what all equipment should I look at buying? Everything, not looking to "cheap out." I'd probably only do a few hundred balls a year.
 
Human error is exactly what that difference is, it's not because they are 3 grains +/- especially at only 50 yards.
Yes, I agree that human error is a factor especially with off hand shooting, but the differences in the point of impact I have seen with light and heavy balls, 3 grains or more from the average, were from bench rested guns that were bedded in sand bags. I conducted the tests to see if there was a difference in balls that were light or heavy to see if weighing was a waste of time. All other factors were kept constant, i.e. patches, lube and powder charge and swabbing between shots. After these tests I came to the conclusion that I should weigh my cast balls and segregate them by weight to determine target and hunting rounds. Since doing the tests, I have become a better caster of balls, and the number of "culls" is down to maybe 3-4 per 100 cast.
I feel that a possible 3" difference at 50 yards is significant when deer hunting, because the human error also comes in to play, so why handicap myself with a load that could possibly shoot off the point of aim even when I do my part to take and make a good killing shot. To each his own, but I want to take out as many "miss or wound" variables as possible.
 
Is such rudeness and offensive language really necessary?
Before calling someone dumb you should learn how to spell simple words.
Dont think rusticbob himself quite knows what hes talking about. But it's ok, I've done the weighing thing myself.

Plain silly thinking +/- grains is going to show up at 50 yards! Especially a 3 incher. Sounds more like a shooter issue or the world's pickiest gun.
 
[/QUOTE]
QUOTE="necchi, post: 2096298, member: 13842"]
At what? A 36" gong?
[/QUOTE]
Paper target. I knew my ballistics and luckily at the nra Whittington center, they offer large target backers which allowed me to post a target at the very top, and let it drop down into a clean section of the target. During our long range shoot at winter rendezvous, I was the first to hit out gong at just under 200 yards on the first shot. Unweighed balls to boot.
 
Some serious shooters here. Wish my ability with a six gun justified such scrutiny or even shooting a rifle off the bench for that matter.
Modern rifles pushing the limits, maybe. But then again way out side this nimrods expertise.
 
Some serious shooters here. Wish my ability with a six gun justified such scrutiny or even shooting a rifle off the bench for that matter.
Modern rifles pushing the limits, maybe. But then again way out side this nimrods expertise.
Lots of practice over the years! I like to be good out to at least 150 during hunting season.
 
Lots of practice over the years! I like to be good out to at least 150 during hunting season.
I shoot twice a week. Don’t think weighing my balls are going to improve on these groups. 😜
 

Attachments

  • 4F482B11-2409-4C68-A1A6-7210F435357F.jpeg
    4F482B11-2409-4C68-A1A6-7210F435357F.jpeg
    97 KB
  • 503045C0-0C41-4A0C-8D92-37485197F935.jpeg
    503045C0-0C41-4A0C-8D92-37485197F935.jpeg
    85.4 KB
It seems my post really riled some of you. Sorry about that. I'm sticking with weighing my cast balls cause I have proven to myself,,,,,
Don't fret, go back and re-read post #4 of this thread.
Nay-sayers pounce on threads like this,, and have for years.
Then there's folks like you and I. They have simply proved it to themselves that it does make a difference.
 
Back
Top