Were percussion single shots carried capped?

[FishDFly]

Don’t remember where I got it but about 25 years ago I bought a machined brass nipple cover with an O ring inside and a hole for a leather thong through the top. The O ring keeps it from falling off and keeps water out as well. Lower the hammer on the cover and just give it a quick tug on the thong after you **** the hammer and it falls to the side and you’re good to go. One of the more simple and efficient tools I’ve seen.

October Country carries a nipple and cap over so a rifle or single shot pistol can be safely carried with a cap on the nipple. Comes with an o-ring so it is water resistant as well.

 

[Uncle Miltie]

I noticed that quite a few original Target rifles didn't have a half ****. I would think because you just capped at full **** then fired

I sometimes do this with my repro military rifles and muskets, if I'm pointed downrange I'll just full **** it and cap it. Then aim and fire

I have a number of them which I shoot at the range and in matches. "Speed locking" is not a new idea, and on a number of them the hammer will barely clear the nipple enough to insert a cap.

 

[Stantheman86]

I have a number of them which I shoot at the range and in matches. "Speed locking" is not a new idea, and on a number of them the hammer will barely clear the nipple enough to insert a cap.

People apparently used to "cheat" at Skirmishes by installing Trapdoor tumblers in 1861 Springfield rifles and somehow the hammer would fall from the 2nd click and be like a target hammer

 

[vintovka]

Has anyone yet mentioned AD'd from just snagging hammer on brush and stuff in the field? Can happen at every **** position and may damage sear as well

 

[springfield art]

Probably a combination of all mentioned.

 

[Billy Boy]

I was always curious if anyone used a safety device such as a cylinder made out of wood to go around the nipple. Draw pistol, **** hammer vertically (wood cylinder falls off), ready to take care of business.

As shown here before, I turned a bronxe ‘cap cover’ that sits on the barrel and is chained to the forearm. Requires one hand and no visual input to get the thing smoking, this is a Billinghurst style action with no half ****.

and no visual input to get the thing smoking

 

[earlwb]

I am also in agreement that if they had their gun loaded, the it was capped and on halfcock. To me it makes no sense to not have it capped. I was thinking of the little pocket guns. When at the gambling table, are you going to pull that derringer out of your pocket and cap it before pointing it at your problem?

Now having something to help protect the cap was probably done, but not widespread though. I do have a leather frizzen cover on my flintlock rifle. It is easy to flick off when needed. But I don’t think that I really need it though.

 

[Stantheman86]

Has anyone yet mentioned AD'd from just snagging hammer on brush and stuff in the field? Can happen at every **** position and may damage sear as well

That famous YouTube hunter blew 2 of his fingers off carrying a Hawken "African style" or whatever it is, with the rifle over his shoulder and his hand over the muzzle. He had the hammer I assume on half **** or down on a cap and the hammer snagged on a branch and fired the rifle

 

[beardedhorse]

On the Oregon Trail there were numerous recorded incidents of injury or fatalities when someone pulled a loaded muzzle loading from the muzzle out the tail end of a wagon. It was obviously capped or primed. I hunt with muzzle loading shotguns and am constantly checking to see if the cap is on the nipple. Carried at half **** and cocked when pheasant or grouse flushes.

 

[M. De Land]

as for a six shot revolver, with only 5 chambers loaded, why did they make them with six chambers? I think that it is a modern thing for safety. back in the day you needed all the shots that you could get. jmho.

I would think they were just from the practicality of keeping them water tight and instantly ready for use. Who wants to fumble with caps in an emergency?

 

[Snydly]

They might have done it as I do... Capped with a small piece of soft leather over the cap with the hammer resting on it. Can't go off accidentally but when the hammer is cocked the leather falls away. Mine is attached to the trigger guard so it is not lost.

 

[One time]

If the cap fit on the nipple a bit loose, I pinch the sides a little to make it fit tight enough so as not to lose it, and have the hammer on half ****