White smoke

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 10, 2020
Messages
855
Reaction score
956
I have read that coffee creamer is sometimes used with a blank load to make white smoke. Any details on how this is done? Quantities etc?
 
Captndan,

I haven't tried this in my own cannon, but powdered coffee creamer is very flammable and has been used in the pyrotechnics world for a fair amount of time to produce impressive fireballs. Having done this as a display in a static, vertically set can, I am fairly sure it will do the same (enhancing both flame & smoke) in a cannon. Here is some information on it from the pyrotechnic world.

https://www.skylighter.com/blogs/how-to-make-fireworks/cremora-fireball
 
I have used coffee creamer before, lots of flame and smoke, it also spits bits out, don’t do it near dry grass. I had better results using talcum powder, it’s cheap in bulk. I used 1 cup in a 2” bore gun with 600 gr. Of cannon powder. The audience loved it. And very safe.
 
I have used coffee creamer before, lots of flame and smoke, it also spits bits out, don’t do it near dry grass. I had better results using talcum powder, it’s cheap in bulk. I used 1 cup in a 2” bore gun with 600 gr. Of cannon powder. The audience loved it. And very safe.
Did you wrap the talc in anything?
 
Back
Top