• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Dickydalton's Robert. E. Lee Commemorative Custom

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Here ya go, sorry about that!!
This is the set screw installed.

20240706_150144.jpg


The main spring contacting the set screw Ends any further movement of the action.
20240706_150217.jpg


Mike
 
This is hands down, the Finest black powder revolver I own. I admit I used a rest for the barrel today because I wanted to check the gun and not me. I hate to say it but I am also on 4 liters of oxygen 24-7 so just walking out to put the target up is a chore. At 15 yards my group for 48 rounds was 6". Fully 50% were 3 to 4 in the same hole and I had flyers. Not a single malfunction of the revolver in any way and it is smoooooth.
 
This is hands down, the Finest black powder revolver I own. I admit I used a rest for the barrel today because I wanted to check the gun and not me. I hate to say it but I am also on 4 liters of oxygen 24-7 so just walking out to put the target up is a chore. At 15 yards my group for 48 rounds was 6". Fully 50% were 3 to 4 in the same hole and I had flyers. Not a single malfunction of the revolver in any way and it is smoooooth.

Thanks Dicky !!! That sounds great!!!

Mike
 
This is hands down, the Finest black powder revolver I own. I admit I used a rest for the barrel today because I wanted to check the gun and not me. I hate to say it but I am also on 4 liters of oxygen 24-7 so just walking out to put the target up is a chore. At 15 yards my group for 48 rounds was 6". Fully 50% were 3 to 4 in the same hole and I had flyers. Not a single malfunction of the revolver in any way and it is smoooooth.
Just for fun. What load/bullet/cap,sizes did you use?
 
This is one of the reasons I say Mike is the 'best'. I've sent him 3 guns so far, and while none of them were showstoppers to begin with, they handle and operate like no other guns in my collection, even some of the NIB unfired ones.
 
Back
Top