• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

WITHDRAWN 40 cal barrel used in nice shape

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Sep 16, 2021
Messages
954
Reaction score
1,301
Location
30646
This is a used barrel
32" barrel bore looks good no rough spots noticed.
Sights installed
Under rib and thimbles are soldered on
Breech plug in place and tang is included.
275$ shipped FIRM

Payment money order
Thanks for looking
Bill
 

Attachments

  • IMG_20240721_130830815~2.jpg
    IMG_20240721_130830815~2.jpg
    417.4 KB · Views: 5
  • IMG_20240721_130828804~2.jpg
    IMG_20240721_130828804~2.jpg
    800.7 KB · Views: 0
  • IMG_20240721_130833462~2.jpg
    IMG_20240721_130833462~2.jpg
    922.9 KB · Views: 0
  • IMG_20240721_130839249~2.jpg
    IMG_20240721_130839249~2.jpg
    532.5 KB · Views: 0
  • IMG_20240721_130843742~2.jpg
    IMG_20240721_130843742~2.jpg
    600 KB · Views: 0
  • IMG_20240721_130847916~2.jpg
    IMG_20240721_130847916~2.jpg
    461.5 KB · Views: 0
  • IMG_20240721_130851818~2.jpg
    IMG_20240721_130851818~2.jpg
    573.5 KB · Views: 0
Last edited:
can you give me an idea about bore condition, the twist, width across the flats and who made it? also a full pic showing what the breech end looks like and what the tang looks like ? thanks
 
can you give me an idea about bore condition, the twist, width across the flats and who made it? also a full pic showing what the breech end looks like and what the tang looks like ? thanks
Across the flats appx .940
bore looks good as I stated
Twist unknown
Maker unknown
There is a picture of the breech and tang already posted.
 
Status
Not open for further replies.
Back
Top