• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Another newbie question. Fired a couple primers

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 10, 2024
Messages
41
Reaction score
42
Location
Ga boy hanging out in North Carolina
I haven’t shot my rifle yet. Ever. Just got it. Work been to much. But I fired it today ( primer only ). Just wanted to hear
IMG_6384.jpeg
it crack. lol. I know nothing yet. So newbie question is …. Does my spent primer caps supposed to look like this. Both fired instantly. I’m guessing it does. But wanted to ask. Thanks Wardawg
 
That’s what mine look like to a greater or lesser degree. One thing I didn’t count on was when I fire my left barrel, it irritates my left arm with the ejecta coming off the skirts of the cap. So that’s normal as well.
 
After firing caps you should clean your gun, if you did not know that already.
I didn’t pull the nipple ( stainless ) but did scrub the bore really well. I had coated it with Ballistol and the patches came out a light brown. Hoppes #9 solvent the bore . Patched dry. Break free CLP the bore then bore brushed. Patched dry. Then a light CLP patch. It’s going to be a solid month till I can get her out and finally shoot her. I doing basically 6 days a week , 12 hour days. My one day off is booked. ****** ole lady syndrome. lol. 😆
 
After firing caps you should clean your gun, if you did not know that already.
I heard that modern caps aren’t corrosive. Depending on how strongly people feel about how clean a gun is, one might not choose to clean after popping only a cap, without concern for damage. I can attest to that with my Pedersoli, but that there is a thin chrome plating in the Pedersoli. YMMV
 
It is also not unusual for some of the rust inhibiting products to oxidized a bit during storage and turn brown when a fresh patch is run down the barrel to take out the storage oils. @WarDawg is seeing that from the Ballistol mineral oils still in the barrel. WarDawg should be sure to use the Hoppe's #9 black powder solvent that is formulated to give better protection from black powder (and substitutes) fouling than the #9 version for smokeless powders.
 
It is also not unusual for some of the rust inhibiting products to oxidized a bit during storage and turn brown when a fresh patch is run down the barrel to take out the storage oils. @WarDawg is seeing that from the Ballistol mineral oils still in the barrel. WarDawg should be sure to use the Hoppe's #9 black powder solvent that is formulated to give better protection from black powder (and substitutes) fouling than the #9 version for smokeless powders.
Thanks for the reply. I read Ballistol can give a brownish look when left in a barrel. I patched it at full strength. And thanks for the Hoppes in question. I just got some of the Hoppes black powder cleaner in. Has a damn child proof cap that I’m struggling with. 😳. I only used the normal Hoppes because it was open and I haven’t shot black powder yet. I honestly appreciate the advise from all. Wardawg
 
Thanks for the reply. I read Ballistol can give a brownish look when left in a barrel. I patched it at full strength. And thanks for the Hoppes in question. I just got some of the Hoppes black powder cleaner in. Has a damn child proof cap that I’m struggling with. 😳. I only used the normal Hoppes because it was open and I haven’t shot black powder yet. I honestly appreciate the advise from all. Wardawg
Water and dish detergent, maybe with Windex or ammonia added, are all you need to clean black powder. Water can be cold or hot, people make claims both ways for effectiveness, just dry the bore really well after and run an oiled patch down, followed by a dry one.
 
It's also good to hold the muzzle about an inch from a leaf or some grass when popping caps.

Watch for the leaf to wiggle, it indicating your bore is clear.
I used to do that too, for at least 25 years, and then it dawned on me if I cleaned my gun very well with the nipple out, blowed some air thru the nipple hole and then stored the rifle with the barrel down, there were no need to worry and so far it has worked for several years. Might not work for everybody, I guess you just take your own chances but I know primers are getting hard to get, so that maybe saving a few was worth the effort.
 
I haven’t shot my rifle yet. Ever. Just got it. Work been to much. But I fired it today ( primer only ). Just wanted to hear View attachment 335482it crack. lol. I know nothing yet. So newbie question is …. Does my spent primer caps supposed to look like this. Both fired instantly. I’m guessing it does. But wanted to ask. Thanks Wardawg
OMG!! THEY BROKE?!!?
That must be a defective batch! I suggest sending the remainder to me for safe and proper Eco friendly disposal!!
😇
 
Back
Top