Anyone got a fix for this? I've never had problems clearing the problem before, but this one doesn't want to go together and work properly. I cleaned it with denatured alcohol. I know this has to be something simple. Thanks for solutions!
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Jamming flintlock priming spout.
- Thread starter waksupi
- Start date
Help Support Muzzleloading Forum:
morehops52
50 Cal.
A photo or two might be helpful
If a corroded , or priming plunger fouled w/ damp powder isn't working , carrying a spare to replace the fouled one will help until you can get to where the device can be cleaned. To help prevent gooy powder residue from fouling the primer's nozzle , keep the lock pan free of moisture common to shooting in damp or high humidity weather. W/o a pic , we can only assume we're on the same page.
empty and drop into hot water. lube threads where required
I fully cleaned it. When I measure, it appears the spring is around .018 larger in diameter than the female tube. It came out, it has to go back in some how. I'll get some pictures tomorrow.
- Joined
- Mar 13, 2020
- Messages
- 7,457
- Reaction score
- 20,893
- Location
- On the Border in Idaho looking at BC
stretch the spring it will go in and return to length when used
Problem solved. The spring had somehow contrived to screw itself down below the shoulder of the plunger. Screwed it back into the proper free position, presto chango, fixed!
Don't ya love it when things come together.
Similar threads
