I was toying with the idea of taking a 45 caliber TC Patriot barrel and making a "half-howdah" pistol out of it by boring it out to 20 gauge (.615") or 18 gauge (.637")
Thoughts, input?
Thoughts, input?
Last edited:
TC Patriot, custom bore out thoughts
- Thread starter Newly O’Brian
- Start date
Help Support Muzzleloading Forum:
Who is going to bore it out? You or a third party? Could get a few $$$ into it if you send it out.
True dat, I work in waterjet cutting and machine shop. So, I have machines, talent, reamers and measuring equipment.
Just wondering, if anyone has done something like this?
Just wondering, if anyone has done something like this?
That or one heck of a "MAN-STOPPER"
Since you asked:
A couple-three thoughts:
Patriot barrel is 13/16” or .8125”. Given the rear sight screw holes and front sight dovetail, an approximately .62 bore out may not be realistic. Also, there will not be enough internal metal left to properly seat the breech plug.
The Patriot stock is known to crack under loads heavier than .45 factory suggested loads. A .62 payload may exceed the load capacity of the stock.
Patriot barrels are desirable “as is” to shooters and collectors.
Just my thoughts on this subject.
DanL
A couple-three thoughts:
Patriot barrel is 13/16” or .8125”. Given the rear sight screw holes and front sight dovetail, an approximately .62 bore out may not be realistic. Also, there will not be enough internal metal left to properly seat the breech plug.
The Patriot stock is known to crack under loads heavier than .45 factory suggested loads. A .62 payload may exceed the load capacity of the stock.
Patriot barrels are desirable “as is” to shooters and collectors.
Just my thoughts on this subject.
DanL
Last edited:
- Joined
- Feb 15, 2020
- Messages
- 129
- Reaction score
- 107
Another thought; the Patriot is a target pistol and is set up to always use the set trigger. You can't fire it with just the firing trigger, you have to pull both in sequence. Of course you can do this but a Howdah is a hunting/defense gun. It would be kinda silly to have a quick to action pistol with a two action trigger.
Maybe the set trigger can be modified to fire on just the rear but I'm not that smart.
I hope that your bore is already in bad shape.
Other here have recommended Bob Hoyt for barrel reboring. I have no experience with him.
Maybe the set trigger can be modified to fire on just the rear but I'm not that smart.
I hope that your bore is already in bad shape.
Other here have recommended Bob Hoyt for barrel reboring. I have no experience with him.
I think you would be money ahead to sell the patriot and buy a smoothbore single trigger. Closer to what your looking for
Similar threads
SOLD - Pending funds
Thompson center patriot 45 with 36 barrel 640.00
