• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Questions regarding a Green Mountain barrel...

shop deals on amazon
Shop deals on ebay
L & R
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
YampaValleyMountainMan

YampaValleyMountainMan

32 Cal
Joined
Sep 13, 2024
Messages
22
Reaction score
16
Location
Yampa River Valley, CO
Found this T/C Hawken semi-locally and was told that it has a Green Mountain barrel.

Being a "greenhorn" myself, I have the following questions for the collective...

1. Can anyone verify from the stamp that this is a Green Mountain barrel?
2. If the answer to 1 is "yes", can anyone comment on the corrosion present in the breech where the flash channel enters?
3. My understanding is that this is a 15/16ths barrel if it is a Green Mountain. Is that correct?
4. Thoughts on the Williams sight pictured?

Thanks so much in advance!
 

Attachments

  • IMG_1471.jpg
    IMG_1471.jpg
    878.5 KB
  • IMG_1473.jpg
    IMG_1473.jpg
    3.6 MB
  • IMG_1474.jpg
    IMG_1474.jpg
    3.5 MB
Agree with @Loyalist Dave and his comments.

Green Mountain made 15/16” and 1” drop in barrels for TC, you need to measure the barrel to know what it is. The corrosion in the breech is not a good sign. Barrel may cleanup or could require a refreshing or rebore. If the nipple hole threads are also corroded, that’s another issue that will need to be addressed. Good luck.
 
The second picture of the breech configuration this common for GM barrels, the short drilled flash chamber turned me off, all TCs have this chamber drilled all the way under the nipple. When I saw this in my barrel, I got out my Dremel and extended the flash chamber all the way under the nipple. Before you critics get in an uproar about my Dremel use, let it be known I was a power duck decoy carver with years of detail carving experience with a Dremel and Fordom tool, I also have a selection of bits the likes of which most people have never heard of.

The corrosion in the breech of the gun in question is a huge red flag, it wasn't cleaned properly, I suspect the barrel has some of this rusting and pitting as well but you wouldn't know for sure without a good bore scope.

I would pass on this gun because of the badly corroded breech.
 

Similar threads

M
Green Mountain barrel?
Replies
11
Views
972
Vtmountaindeerhunter
V
Splitear
  • Locked
SOLD SOLD: Green Mountain .45 Cal Percussion Barrel: Updated and Reduced
Replies
12
Views
939
m4fun
M
Splitear
  • Locked
SOLD Green Mountain .40 cal. Drop In Barrel: $225 shipped
Replies
9
Views
893
Splitear
Splitear
mloader40
FOR SALE Thompson Center Renegade custom 26 in Green Mountain Barrel in 40 caliber
Replies
0
Views
735
mloader40
mloader40
mloader40
  • Locked
WITHDRAWN $530.00 shipped Thompson Center Renegade with 26-in custom 40 caliber Green Mountain Barrel
Replies
10
Views
2K
mloader40
mloader40

Latest posts

Back
Top