• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Where to find real 32 Caliber soft lead Ball for the tiny BP Revolvers

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 30, 2023
Messages
11
Reaction score
2
Location
California
So where do I find the 32 caliber balls for the Uberti and/or Pietta 32 caliber cute little revolvers.
Spent parts of several different days reading internet including searching this forum, .... where the answers are
-Use Hornady 0.315" Lead Ball
-Use 00 Buckshot.

Internet Experts that have a cushy government jobs,.... so they have time read the internet all day and become such a thing...... retype what they read stating 0.319 to 0.324" Diameter is what you need-at least for the uberti baby.
Hornady seems to be the only mass producer of lead balls these days (remember-lead is evil-get use to using airsoft balls in your M/L!), .... and only in 0.310 & 0.315".... nothing larger except too large.
Also found on internet there is this Black Powder ballistic table that says using the undersized 0.315" ball can loose not only accuracy but 45% of muzzle energy (poor gas seal) so at least one real person went outside his house and did some real shooting to come up with this to share his real experiences-you do not see this often these days!
Do to advanced age I cannot say from personal experience that using 0.315" ball is much less accurate than if I used a real 32 caliber ball...... as it could be my shaky hand and blurry eyes. I do much better with the Navy though.
I cannot even find the too hard Single 0 Buckshot except loaded.
Some of Internet says to use 00 Buckshot-but then other parts of internet says its too large and too hard and combined you will surely break your dainty loading lever and poke your eye out!-and I read two internet stories of such-surely they were not made up as one poster showed pictures-so it must be true and not the result of some other misuse nor staged. I could always use an external press but using the correct ball size and hardness doing the actual revolver loading lever ritual I find a much more appealing experience when at the range.
Alternatively I could melt and pour my own but I have not started/setup for this, .... so it would be another setup and cost and to occasionally shoot the 32 revolvers-driving cost up to many dollars per round.....might as well shoot my 50 BMG at this price. Also as you get old you downsize, instead of expanding.

So, to get to the point with my questions instead of .... rambling on, and nows the time, the time is now, to sing my song........
Does anyone have a source for the real 32 caliber soft lead ball?
Is there such a thing as "soft" buckshot?
If so where would I find such in Single 0 or 00?

Thank you in advance for your time to read this and your kindly helpful response.
larry
 
Know what diameter is really needed?

I've seen a .31 replica revolver with .310" chambers and .320" groove diameter and another with .32 chambers. Don't know what's considered normal these days for modern manufacturing.
 
The pietta 1863 pocket I had pin gauged .316 in the chambers and .301 in the bore. I never shot it, didn't feel good in the hand, but was going to use .319 ball....Lee makes a .319 mould that would have worked well....

But since a mold doesn't sound like something you want to do, give track of the wolf a look, they have lots of odd sized ball for sale... their item number is

BALL-320-X
 
Last edited:
I find .33 to be the best for the Uberti 1849.
I cast 00 buck from a lee mold for roundballs and use the eras gone conical for conicals which is my preferred round on 15 grains of pyrodex or t7.
The most frustrating and hardest pistol to get running reliably in my collection.
Doubled mainsprings and slixshots with cci#11 magnums or printed caps is what works on mine.
 
@Larry-in-Eastbay, before you go chasing off after soft lead round balls, measure the diameter of the cylinder at the chamber mouth and the diameter about 3/8" from the chamber mouth. You will need a ball that is 0.006" to 0.010" larger than the smaller of the two measurements. The round ball has to be over sized at the chamber mouth to seal the cylinder and hold the ball in place.

The 0.310" are generally used with a patch in 32 caliber rifles.

Graf's in Mexico Missouri has Hornady 0.310" and 0.315" balls.

Stonewall Creek has 0.310" and 0.319" hand cast balls
https://stonewallcreekoutfitters.com/shooting-supplies/bullets-balls-and-slugs/

And of course, Track of the Wolf with a large selection of swaged and cast round ball.
https://www.trackofthewolf.com/List/Item.aspx/127/1

Remember to measure your revolver first before you place an order.
 
First you need to measure the I.D. of each cylinder chambers then add 0.005" - 0.007" to the average diameter measured and look on Track of the Wolf for the closest diameter lead cast ball that they sell and give them a try. My two cents worth. These small caliber revolvers are not target guns by any means. They are 10 foot tin can shooters at best.;)
 
So where do I find the 32 caliber balls for the Uberti and/or Pietta 32 caliber cute little revolvers.
Spent parts of several different days reading internet including searching this forum, .... where the answers are
-Use Hornady 0.315" Lead Ball
-Use 00 Buckshot.

Internet Experts that have a cushy government jobs,.... so they have time read the internet all day and become such a thing...... retype what they read stating 0.319 to 0.324" Diameter is what you need-at least for the uberti baby.
Hornady seems to be the only mass producer of lead balls these days (remember-lead is evil-get use to using airsoft balls in your M/L!), .... and only in 0.310 & 0.315".... nothing larger except too large.
Also found on internet there is this Black Powder ballistic table that says using the undersized 0.315" ball can loose not only accuracy but 45% of muzzle energy (poor gas seal) so at least one real person went outside his house and did some real shooting to come up with this to share his real experiences-you do not see this often these days!
Do to advanced age I cannot say from personal experience that using 0.315" ball is much less accurate than if I used a real 32 caliber ball...... as it could be my shaky hand and blurry eyes. I do much better with the Navy though.
I cannot even find the too hard Single 0 Buckshot except loaded.
Some of Internet says to use 00 Buckshot-but then other parts of internet says its too large and too hard and combined you will surely break your dainty loading lever and poke your eye out!-and I read two internet stories of such-surely they were not made up as one poster showed pictures-so it must be true and not the result of some other misuse nor staged. I could always use an external press but using the correct ball size and hardness doing the actual revolver loading lever ritual I find a much more appealing experience when at the range.
Alternatively I could melt and pour my own but I have not started/setup for this, .... so it would be another setup and cost and to occasionally shoot the 32 revolvers-driving cost up to many dollars per round.....might as well shoot my 50 BMG at this price. Also as you get old you downsize, instead of expanding.

So, to get to the point with my questions instead of .... rambling on, and nows the time, the time is now, to sing my song........
Does anyone have a source for the real 32 caliber soft lead ball?
Is there such a thing as "soft" buckshot?
If so where would I find such in Single 0 or 00?

Thank you in advance for your time to read this and your kindly helpful response.
larry
I got .320 balls from Dixie rather than bothering to cast them. The price of a .320 mold bought me years worth of balls for a gun fired infrequently like my 1849.
 
The #0 buckshot is about 0.320" in diameter and has antimony that makes it a bit harder than the more desirable soft lead.
Yes it does have a bit of antimony, but I have used it in my pocket 1863 Remmy with no apparent issues.

Haven't used #00 but I have read and been told it is hard to load in the little pistols.

As far as accuracy the "pocket" revolvers have been known from the day they were first manufactured as having "cross table accuracy". I think sights, sight radius, barrel length and ergonomics probably have a lot more to do with that than the projectile.
 
Thank you ALL for the kindly replies.

Somehow I missed The Wolf Cries when I looked.
Dixie has no 0.320, largest 0.315, but like the Crying Wolf and myself they are downsizing as we all age together.
I saw the Graf buckshot before but its miscellaneous teardown single 0 buck of likely various manufactures, tolerances, hardnesses, and looks like ~25% copper jacket from the photo. So what is the conversion of single 0 buckshot count per pound?

Cylinder Chambers are 0.318" for the Uberti with one of the five cylinders at 0.3175" ........ and 0.3115" to 0.315" for the Pietta. The Pietta is new to me (Midway sale) and not yet deburred or shot through so probably why the large variation and smaller diameter. Got to say this Pietta feels really sloppy in tolerances but passes basic function tests....... but only after 100+ cock and cycle break in-prior it was really sticking and finicky out of the box and had to manually manipulate the cylinder to get it to turn an cock.

So......
DING DING DING...The Wolf Cry it is.
.....also apparently no LEAD Zepp fans here me thinkem!.... so ramble on!

And to drag this thread out some more......
I suppose no one knows of a source for conicals for these cute baby revolvers?
Likely Cast only?
Anyone interested in selling 50 to 200 of their own hatched and raised conicals?

Take Care!
larry
 
Ok I’m going to ramblin on, sing my song. I have some I bought that are either .321 or .323 diameter. Unfortunately I’m away for a couple days. And I can’t remember where I bought them! They come in a little cloth bag with a drawstring that much I remember. Not sure if I have the info anyway but I get home Thursday and I’ll check. I know I searched with a title like .323 lead roundball or something. Sorry I couldn’t be of more help. I’m a little dazed and confused the older I get.
 
Ok I’m going to ramblin on, sing my song. I have some I bought that are either .321 or .323 diameter. Unfortunately I’m away for a couple days. And I can’t remember where I bought them! They come in a little cloth bag with a drawstring that much I remember. Not sure if I have the info anyway but I get home Thursday and I’ll check. I know I searched with a title like .323 lead roundball or something. Sorry I couldn’t be of more help. I’m a little dazed and confused the older I get.
I just checked online and log cabin shop and track of the wolf both have .323 roundball available. Track of the wolf I also has .319 and .320. That should give a whole lotta love to your .31 calibers!
 
Ok I’m going to ramblin on, sing my song. I have some I bought that are either .321 or .323 diameter. Unfortunately I’m away for a couple days. And I can’t remember where I bought them! They come in a little cloth bag with a drawstring that much I remember. Not sure if I have the info anyway but I get home Thursday and I’ll check. I know I searched with a title like .323 lead roundball or something. Sorry I couldn’t be of more help. I’m a little dazed and confused the older I get.
Dixie sold me 390 roundball in a drawstring bag. I know those were cast by eddie may.
 
So where do I find the 32 caliber balls for the Uberti and/or Pietta 32 caliber cute little revolvers.
Spent parts of several different days reading internet including searching this forum, .... where the answers are
-Use Hornady 0.315" Lead Ball
-Use 00 Buckshot.

Internet Experts that have a cushy government jobs,.... so they have time read the internet all day and become such a thing...... retype what they read stating 0.319 to 0.324" Diameter is what you need-at least for the uberti baby.
Hornady seems to be the only mass producer of lead balls these days (remember-lead is evil-get use to using airsoft balls in your M/L!), .... and only in 0.310 & 0.315".... nothing larger except too large.
Also found on internet there is this Black Powder ballistic table that says using the undersized 0.315" ball can loose not only accuracy but 45% of muzzle energy (poor gas seal) so at least one real person went outside his house and did some real shooting to come up with this to share his real experiences-you do not see this often these days!
Do to advanced age I cannot say from personal experience that using 0.315" ball is much less accurate than if I used a real 32 caliber ball...... as it could be my shaky hand and blurry eyes. I do much better with the Navy though.
I cannot even find the too hard Single 0 Buckshot except loaded.
Some of Internet says to use 00 Buckshot-but then other parts of internet says its too large and too hard and combined you will surely break your dainty loading lever and poke your eye out!-and I read two internet stories of such-surely they were not made up as one poster showed pictures-so it must be true and not the result of some other misuse nor staged. I could always use an external press but using the correct ball size and hardness doing the actual revolver loading lever ritual I find a much more appealing experience when at the range.
Alternatively I could melt and pour my own but I have not started/setup for this, .... so it would be another setup and cost and to occasionally shoot the 32 revolvers-driving cost up to many dollars per round.....might as well shoot my 50 BMG at this price. Also as you get old you downsize, instead of expanding.

So, to get to the point with my questions instead of .... rambling on, and nows the time, the time is now, to sing my song........
Does anyone have a source for the real 32 caliber soft lead ball?
Is there such a thing as "soft" buckshot?
If so where would I find such in Single 0 or 00?

Thank you in advance for your time to read this and your kindly helpful response.
larry
Ok, I will give you some simple advice. Cast you own and no it is not hard to do.
Look at Marty’s Arms for the Gang Mold.
I own 6 of his molds and they work great. Well made and very durable. We can help you learn the process if you do not have any casting experience. PM me and I will be glad to help you.
 
Being a rather over the top bullet caster I have used several sources for my lead including reclaimed buck. It isn't that hard but the petite loading lever of the small revolvers might not hold up to continued use with buck. It runs up to near double digit bhn hardness.


don't know for sure but would prefer nearly pure lead
 
Back
Top