Differences in A&H Breech Hooks

shop deals on amazon
Shop deals on ebay
the hawken shop
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
C

Coueswhitetail

32 Cal
Joined
Oct 24, 2020
Messages
36
Reaction score
10
Just received my 1:66" A&H Mountain Rifle barrel in the mail today and was surprised to find it doesn't quite go into place in my rifle when I swap this new barrel for my 1:28" barrel (not to mention having a damaged rear sight). I've attached photos but it would appear that the breech hooks are ever so slightly off, so I am unable to insert my barrel wedge key into the stock due to around 1/8" of the eyelet on the new barrel hanging into the wood inlet in my stock (in other words the eyelet on the barrel is just a bit too far forward for the wedge to fit through). In removing the barrels to compare, it would appear the new barrel (on the right), has its hook mounted just a bit lower than the breech hook on the original barrel. Is there a way I can remedy this via using a thinner stand-in key or somehow modify the breech plug? Thank you.

1727203413621.png
1727203438688.png
 
Coueswhitetail said:
Just received my 1:66" A&H Mountain Rifle barrel in the mail today and was surprised to find it doesn't quite go into place in my rifle when I swap this new barrel for my 1:28" barrel (not to mention having a damaged rear sight). I've attached photos but it would appear that the breech hooks are ever so slightly off, so I am unable to insert my barrel wedge key into the stock due to around 1/8" of the eyelet on the new barrel hanging into the wood inlet in my stock (in other words the eyelet on the barrel is just a bit too far forward for the wedge to fit through). In removing the barrels to compare, it would appear the new barrel (on the right), has its hook mounted just a bit lower than the breech hook on the original barrel. Is there a way I can remedy this via using a thinner stand-in key or somehow modify the breech plug? Thank you.

View attachment 350835View attachment 350836
Click to expand...
That's pretty common with breech hooks and will require a bit of spot fitting and filing to mate them up to use the same wedge. I used spotting grease to indicate where the proud steel was to be filed to fit.
Possibly the same impact that messed up the rear sight was responsible for the ill fitting breech hook.
 
M. De Land said:
That's pretty common with breech hooks and will require a bit of spot fitting and filing to mate them up to use the same wedge. I used spotting grease to indicate where the proud steel was to be filed to fit.
Possibly the same impact that messed up the rear sight was responsible for the ill fitting breech hook.
Click to expand...
Good to know, thank you! So are you saying I just need to file the eyelet on the barrel that the wedge fits through to make sure it's a tight fit? I'll also note that the rear of the barrel is just a bit "proud" above the rear of the action that it mates to, included is an example photo of the area I'm talking about, but do I need to be concerned about that at all? Essentially the barrel is either a bit bigger than or otherwise just sitting a bit high at the rear of the action.
1727727268730.png
 

Similar threads

W
Asking for help with a Rifle Shoppe Baker Rifle: groups at 50 yards have become dreadful.
2 3
Replies
51
Views
2K
waksupi
waksupi
W
Historically accurate example of Flint, Full stock, hooked breech, barrel wedges?
2 3
Replies
54
Views
5K
ronaldrothb49
ronaldrothb49
mnmuzzleloader
  • Locked
WITHDRAWN 15 Gauge Side by Side English Muzzleloader Shotgun
Replies
13
Views
2K
TCMonts
TCMonts
SDSmlf
A Tale of Two 1861 Enfield Musketoons
Replies
9
Views
738
dave951
dave951
Dave Markowitz
Target Rifle by J.H. Rector of Syracuse, NY
Replies
18
Views
920
Dave Markowitz
Dave Markowitz

Latest posts

Back
Top