• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Would you trust these threads?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jethroat

32 Cal
Joined
Sep 30, 2024
Messages
5
Reaction score
5
Location
WI
I'll try to keep the backstory short. Was given this TC renegade from my (step) grandpa's estate. The person who passed it to me I trusted to know what was what, and so I didn't think twice about using the pack of nipples they gave me. A few years pass and I decide to get it sighted in before WI deer season.

On my third or fourth shot, I feel some sort of blowback, I'm dazed for a moment and then realize my hat is 5 feet behind me, the hammer has been thrown backwards denting the stock, and there is no longer a nipple in the gun. I looked and never found the nipple. Yikes, that pack of nipples was for a tradition's or some other brand, and I now have a problem on my hands.

I took to investigating. The tumbler was shattered, and I read about oversized nipples from TOW. I ordered a new lock, and a .005 and .010 oversized nipples. I was able to get the .010 nipple threaded, and I've attached some photos below. Would you trust these threads with a hunting load? Thank you in advance for your thoughts!

P.s. I've already checked a for a squib, and I do not see any bulging
PXL_20240930_025548323.jpg
PXL_20240930_025516872.jpg
PXL_20240930_025544947.jpg
PXL_20240930_025508205.jpg
PXL_20240930_025459793.jpg
 
Threads on gun and nipple have to match. I wouldn't use an oversized nipple unless the drum has been oversized.

The one that took your hat might have been way undersized, else there wouldn't be much thread left in the drum. Most TC are 1/4-28 out of the factory so check to see if that's still the case.
 
Threads on gun and nipple have to match. I wouldn't use an oversized nipple unless the drum has been oversized.

The one that took your hat might have been way undersized, else there wouldn't be much thread left in the drum. Most TC are 1/4-28 out of the factory so check to see if that's still the case.
It definitely was 1/4-28. But that nipple that ejected took "the point" off the threads in the drum. At the time I initially researched (a few years ago, I'm just now revisiting this project) I was recommended to just buy and oversized nipple and thread it in.

I'm just concerned about the thread engagement at this point.
tracks oversize nipples are made to use their oversize taps. they are not self tapping threads. ;)
I did not know that, maybe I should get that tap, so that it does not gall the threads
 
most i have talked too will not do that due to liability issues.
I am thinking I will buy the tap set and do it myself. I also can't imagine a gunsmith in my area, specialized enough to have the taps, would charge me less than $100 for the job. And maybe I can sell the taps afterwards to recoup some of my money.
 
I'll try to keep the backstory short. Was given this TC renegade from my (step) grandpa's estate. The person who passed it to me I trusted to know what was what, and so I didn't think twice about using the pack of nipples they gave me. A few years pass and I decide to get it sighted in before WI deer season.

On my third or fourth shot, I feel some sort of blowback, I'm dazed for a moment and then realize my hat is 5 feet behind me, the hammer has been thrown backwards denting the stock, and there is no longer a nipple in the gun. I looked and never found the nipple. Yikes, that pack of nipples was for a tradition's or some other brand, and I now have a problem on my hands.

I took to investigating. The tumbler was shattered, and I read about oversized nipples from TOW. I ordered a new lock, and a .005 and .010 oversized nipples. I was able to get the .010 nipple threaded, and I've attached some photos below. Would you trust these threads with a hunting load? Thank you in advance for your thoughts!

P.s. I've already checked a for a squib, and I do not see any bulging
View attachment 352177View attachment 352178View attachment 352179View attachment 352180View attachment 352181
In a word, no. I would opt for a new breach plug if it were my hat.
 
That nipple with its flat base screwed into a hole that has no face for it to contact is a recipe for disaster.
A nipple that screws into the type of bolster threads illustrated should be bored out so that pressure is forcing the threads to tighter engagement.

Please excuse the drawing.
IMG_6845.jpeg
 
I have 30 year old new Englander nipple comes out every cleaning.
dab of white grease when it goes back in.
Still safe and solid after all these years.
Some may say never take it out. I disagree. Holy Black being corrosive will eventually creep into the threading so that comes the time you have to take it out it is putting pressure on threading that may already be compromised.

YMMV
 
I had the same thing happen to me with a TC White Mountain Carbine that I bought off a guy several years back. Before shooting it, I replaced the nipple with a brand new 1/4 x 28 Tres Ampco nipple. When I shot for the first time the nipple flew back thru my hair missing my scalp.(thank God) The hammer flew back denting my stock as well.
I ordered a .255 tap and a .260 tap from TOW. I also ordered some new .260 nipples. I used the .255 tap first, followed up with the .260 tap. The new .260 nipples fit great and my WMC shoots great.
 
ooks like grandpa belonged to the "I take the nipple out every time I clean" bunch. This is the result
What sussexmuzllodr said.


There is nothing with removing the nipple every time the gun is cleaned.

Grandpa stuck a metric threaded nipple into a 1/4-28 threaded hole. i've fixed numerous buggered TC rifles whose owners installed a metric nipple.
 
Back
Top