Wonder why the topic comes up so often?
Unplugging patent breech? Loaded rifle…
- Thread starter SeaBee133
- Start date
Help Support Muzzleloading Forum:
Horizontal Hunter
36 Cal.
- Joined
- Feb 22, 2008
- Messages
- 126
- Reaction score
- 70
That’s exactly what I have done and would do. If it didn’t work the first time I woul try it a couple more times before I resorted to a ball puller.
If you have to resort to a ball puller use a good range rod with a T handle and hook the handle on something that isn’t going to move and pull the rifle not the range rod.
Ditch the 777 it has the highest ignition temperature of the substitute powders.
Bob
SeaBee133
40 Cal
All I use in my ROA if I can’t get my hands on some Swiss 3F or any real deal 4F. Never an issue in the revolver.
I have around 3/4 pound of Swiss 3F. Will switch to it, 20-30gr under a couple 50gr T7 pellets. Last time I shot that load (.54 GPR) it holed a beer can at 60yds the first shot.
Stykbow
50 Cal.
- Joined
- Aug 2, 2021
- Messages
- 1,079
- Reaction score
- 2,536
Simple, they’re using too much oil.
I've never experienced this or heard of it in 30 years of using one back when we had a local territorial match 1 of the guys adapted a 15 lb fire extinguisher for the matches but then most of the use was for dry balls
I have seen it twice in my 45 years of shooting BP guns. Once it happened to me with an old T/C New Englander. I unloaded the gun at the end of deer season using the c02 discharger, ran a patch with Barricade down the bore and put the gun in the safe. The following fall, I went to load the gun with my standard load and noticed the witness mark on the ram rod was a 1/2" above the muzzle. I pulled the ball and dumped the powder, then ran a patch down the bore and it wouldn't go all the way to the breech. A bore scope look showed the ring of powder around the walls of the barrel. I had to scrape out the powder with a breech scraper.
The other time a friend had the same ting happen to him
I suspect that in both cases, the load was heavily compressed and the powder became stuck to the barrel over time.
I've found on my T/C that I can take a slotted tip in the .30 cal range from my cleaning kit, stick a cotton cleaning patch through about halfway, and fold the remainder of the patch over the rounded end of the tool to clean out the breech. Seems to work famously on my rifle.
100 gr T7 3f = @ a min. 120gr BP
Mag cap not needed
And ya didn't remove the nipple so the paten breech is all gunked up.
Mag cap not needed
And ya didn't remove the nipple so the paten breech is all gunked up.
SeaBee133
40 Cal
Magnum caps were all that was available the last few years. Freshest tin I have. I keep 10s and 11s on hand. Have taken the TC hunting years ago, only shot the GPR for fun a couple times. Friend I inherited them from rarely shot either, so got probably 300 11s along with the rifles.
SeaBee133
40 Cal
Punched through the breech blockage. When the rain stops (Hurricane Francine remnants) will try shooting it clear.
Nipple pick and a stiff paint gun cleaner, think wire core plastic bristel pipe cleaner…
Nipple pick and a stiff paint gun cleaner, think wire core plastic bristel pipe cleaner…
When I shoot my TC 56 SB I learned many years ago that after wiping the bore with alcohol to clear the RIG from the bore I then shoot a blast of brake cleaner thru the nipple. Never had a problem with doing that it fires every time with a #11 cap.
My wife keeps me well informed as to my bad habits.
So this is a recurring theme: "TC such and such, with a patented breech won't shoot". Not being sarcastic here at all, but I have 2 "cheap, cr_ppy, budget" Ardessas that fire every single time with very good accuracy, and 2 TC Hawkens that are a royal PIA. I can make them both shoot with t-7 and cci #11's, but they are very fussy about ignition, until you have the bag of tricks down, and one is a terrible shooter [crappy bore] with everything I have put through it. And the other is no more accurate than either Ardessa. Guess which rifles I take hunting ? And both TC's have chronic flash channel/nipple issues that my other 2 rifles don't have. And I don't have to play nipple roulette to figure out what my Ardessas like. I can spend more money for more durable nipples for them, but they won't go bang any better. I walk into my local SGS and grab a 2 pack of Traditions nipples and back in business. No endless debates about the best nipple for an Ardessa. [or CVA]
So what is all the nostalgia about TC coming back to life with the same old Hawken ? How about an American company producing a moderately priced Hawken with a moderately higher price, reflecting better wood, fit and finish, better ramrod and ironing out the drawbacks of the TC ignition design. It happened in Spain with an American original. Maybe it could happen in America, even better, for a few dollars more. It wouldn't hurt either if the accuracy climbed a notch over the original TC's.
I notice, as well, a steady stream of threads complaining about the same problems with the Euro and Japanese TC Hawken knockoffs. I like the solid feel and walnut of the TC's, but their issues are just not that attractive to me.
I really wanted to love them, but they turned out pretty frigid. SW
So what is all the nostalgia about TC coming back to life with the same old Hawken ? How about an American company producing a moderately priced Hawken with a moderately higher price, reflecting better wood, fit and finish, better ramrod and ironing out the drawbacks of the TC ignition design. It happened in Spain with an American original. Maybe it could happen in America, even better, for a few dollars more. It wouldn't hurt either if the accuracy climbed a notch over the original TC's.
I notice, as well, a steady stream of threads complaining about the same problems with the Euro and Japanese TC Hawken knockoffs. I like the solid feel and walnut of the TC's, but their issues are just not that attractive to me.
I really wanted to love them, but they turned out pretty frigid. SW
smoothshooter
50 Cal.
What do you mean by “fluid”? You may have been using something that will not loosen BP fouling.
SeaBee133
40 Cal
Actually used a blackpowder solvent. Some Ballistol product (labeled) that is in reality a cheap Chicom knock off. Wife picked it up with a .50 cleaning kit and patches.
- Joined
- Mar 1, 2022
- Messages
- 1,161
- Reaction score
- 1,443
OK I am going to say it. The ROA is basically an in line. So of course it would handle synthetic powder better. By the way Precussion sxs double guns are also basically an inline.
Kudos' go to Idaholewis for this image of his cut-down TC breech which he'd posted way back in 2019, as it clearly shows the patent breech and the angled flash channel in which some crud could impede flash from the nipple.
When I had a TC Hawken, I'd use a .36 or .40 cal bore brush (in a .50 bore) to get it into that rounded part of the breech. You can get a small diameter pipe cleaner into that channel too, but make sure you blow out any lint from it afterwards, And, as was noted above, popping off a cap or two before loading -- aim at a leaf or blade of grass on the ground, and you should see it move from the gas pressure -- will also help prevent any misfires.
Hope this image helps you "see" what the issue could be.
Old No7
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
When I had a TC Hawken, I'd use a .36 or .40 cal bore brush (in a .50 bore) to get it into that rounded part of the breech. You can get a small diameter pipe cleaner into that channel too, but make sure you blow out any lint from it afterwards, And, as was noted above, popping off a cap or two before loading -- aim at a leaf or blade of grass on the ground, and you should see it move from the gas pressure -- will also help prevent any misfires.
Hope this image helps you "see" what the issue could be.
Old No7
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
- Joined
- Jan 15, 2009
- Messages
- 3,090
- Reaction score
- 3,056
That works very well for me too.
IME: There's no need to pop caps prior to loading a well maintained rifle.
SeaBee133
40 Cal
Have one of those as well. A Moore and Harris that has basically been shot apart. Stock is split between the locks, barrel ends are razor thin, checkering is worn to just shallow lines… It’s at the local history museum, which was built on the shotgun owner’s property. Confederate veteran, state house member after the war.
This recurring discussion is the reason all my percussion guns are drum and nipple with a cleanout screw. Just avoid the problem.
