• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Am I the only one who doesn’t really care for carving on a rifle stock?

the hawken shop
shop deals on amazon
L & R
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
It depends on what I am building. I am currently working on a Henry Trade Rifle which will be plain, no carving or engraving. In my opinion the carving on the Woodsrunner is just way too busy. The one that Jim Kibler did where he changed that carving to a relief carving was a much more attractive rifle. If I carve or engrave a rifle it will be a simpler design. I like the Baroque style carving. The same can be said for rifles like the Bedfords with a dozen or more inlays. It just gets too busy for me.
 
nkbj said:
Some rifles look great with the additional embellishments and some don't...
All a matter of the eye of the beholder.
Click to expand...
The Crisco Kid said:
It's always been my thought that plain work done well looks much better than fancy work done poorly.
Click to expand...


Agreed! Unfortunately, I've seen too many "carved" stocks on rifles for sale for a pretty penny where the lock wasn't inlet in a correct manner because in my opinion the builder was in a hurry to get to the carving and rushed the basics. I've also seen carving that appeared to be in my opinion done by a kid with a mallet and a flat bladed screw driver YET the guy doing the work wants an extra $1000.00 over the cost of just building a plain rifle. That's fine, I choose to buy or not, and it's a "not!"

LD
 
Not just carving, but ANY decoration on a muzzleloader is functionless and has vanity as its motive. I don't like it. Just like engravings on an unmentionable, it merely adds to the cost. Not only that, but if the owner uses a gun with a carved stock, it will gather dings and scratches, and how awful does a fancy stock look when beat up? Way worse than a beat up plain gun.
 
I think a well-designed and executed stock has a grace and beauty of it's own. That beauty can be enhanced by good carving, but the carving alone doesn't carry the day.

You can put perfectly done carving on a stock that looks like a club, and it will still look like a club... a fancy club, but a club none the less.
 
I have never read so much hogwash justifying a plain jane tasteless gun.

From the John Schreit rifle (and before that in Europe) until the later part of the percussion era a QUALITY rifle had some carving and usually some engraving, yes, a cheaply made barn gun can have good lines but any maker of that era that had any talent decorated their rifles. And some of the surviving examples are still beautiful even with all the use, wear and tear.
Look them up.
 
Buff1958 said:
I put together a Woodsrunner kit a few months back. I ordered it with a carved cherry stock.
I have 7 muzzle loaders and it is the only one with carving on it.
I expected to be really thrilled with it but I just seem to like the plain stocks better.

Thanks to Bree at Kibler’s for finding me a Cherry stock with burl in it and it is on the way.

I
Click to expand...
I like both; but a few weeks back a guy had the plainest, most basic un-adorned gun on here, I don't recall his name, but it was so plain, sleek, and simple in it's design that it was a true work of art. Fancy woods, engraving, carving, are all part of the muzzle loading arts, but a basic, "just the works, m'am!" gun is classic in it's own way.
 
Bucolic Buffalo said:
I also like the look of wood. Sometimes carving can take away from what would be outstanding grain or curl.

However, having dabbled in carving, I know how extremely difficult good carving is to do. What the CNC incising does for us is give some people enough that they are looking for to enhance their gunstock. I kind of see it as an opportunity to carefully use my chisels and scrapers. The lines are defined. Perfect C's and S's. Straight lines. Some "doodads". A bit of careful work and I can make it look less like a machine did it. At least, that is the hope. And so if I make my typical error, I will learn how to make it more appealing.
Click to expand...

I tend to agree with liking natural wood and carving can add or subtract to it. Beauty is in the eye of the beholder and is fluid as it can change from person to person and item to item. Just look at clothing some people choose to be subtle while others have to be noticed with a bit of flair. 😃
On another note having the stocks/files already made on a CNC by the hundreds, machine incise carving is a way to make a desirable option that's simple, fast and makes huge profits for the time it takes.
I would think it's only a matter of time before full 3D relief carving is an option on some stocks. Depending on the tooling, very very intricate carving can be done. It wouldn't be as profitable as it takes longer machining times over incise carving.
 
That's why I've always built Southern Mountain style rifles, no carving, patch boxes, or engraving. I did build a J.J. Henry trade rifle for my son that had a patch box and engraving but no carving. If I ordered a Woodsrunner I'd probably do just a simple line on the toe area, cheekpiece, and forestock. But I have too many guns now so that will not happen.
 
Buff1958 said:
I put together a Woodsrunner kit a few months back. I ordered it with a carved cherry stock.
I have 7 muzzle loaders and it is the only one with carving on it.
I expected to be really thrilled with it but I just seem to like the plain stocks better.

Thanks to Bree at Kibler’s for finding me a Cherry stock with burl in it and it is on the way.

I
Click to expand...
A plain to very little carving is my prefered rifle. A working man's gun.
 
reddogge said:
That's why I've always built Southern Mountain style rifles, no carving, patch boxes, or engraving. I did build a J.J. Henry trade rifle for my son that had a patch box and engraving but no carving. If I ordered a Woodsrunner I'd probably do just a simple line on the toe area, cheekpiece, and forestock. But I have too many guns now so that will not happen.
Click to expand...
I bet that Henry was nice! I have a mid-70's Tenn. Mt. rifle by Jack Garner; those type guns are quintessentially American! A lot of focus is on TN/NC now due to the storms, hopefully something good will come out of all this mess.
 
Carving on stocks looks ok. When I get around to doing mine, one of these days, I think I might try to inlay some silver and or copper on the stock. I have done some wood turning in the past and have a little experience with inlaying metals. If we all have the same gun then that would be boring.
 

Similar threads

Buff1958
Dropped my woodsrunner
Replies
2
Views
348
RiverRat
RiverRat
TimInTheMitten
Help Selecting a New Rifle (Cap vs Percussion, and more)
Replies
7
Views
516
Rebel bull
R
MIOutdoorsman
Caliber for a non-collector
2
Replies
29
Views
2K
brazosland
brazosland
kansas_volunteer
Woodsrunner: thinking ahead
Replies
12
Views
2K
longcruise
longcruise
PathfinderNC
Finished Woodsrunner
2 3 4
Replies
61
Views
6K
rusty
rusty

Latest posts

Back
Top