British Light Sea Service Dragoon project !

[PathfinderNC]

Trigger done and definitely lighter….like by half !!! Down from 8-10 lbs to 5ish ! I can definitely live with that Abit more creep for sure but I’ll remedy that down the road.

Something definitely came up while applying the finish though….
I had always planned to lengthen down the apron or beavertail around the tang…but I simply forgot about it in my rush to start finishing
the stock

It ends rather high, originals seem to have extend much farther down….with a thumb rest dished out.
An Original off the net….
View attachment 362672
But looking now it’s creating a big humpback look to the grip I’m not happy about and obviously ends way up on the stock vs the above image.
View attachment 362671


Just might still be enough wood left there to play with…
View attachment 362670

So back to the files we go !!!

Can you post a full photo of where you’re at?

 

[BCWILL]

Things were getting there…..
I was playing with a grease pencil(visible in pics) to rough out where I’d like the apron to end up

 

[PathfinderNC]

That outlined apron line looks way too big. Here is an 1801 model British Sea Service pistol for reference:

 

[BCWILL]

That outlined apron line looks way too big. Here is an 1801 model British Sea Service pistol for reference:

Great pics….they do help alot !
Thanks

I found these pics of a pair of them as well…..pretty close to your examples. Abit of variation amongst these makes it easier to reproduce the looks without being too precise