• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

New Cherry burl stock

Shop deals on ebay
L & R
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Buff1958 said:
Finished my new Woodsrunner .54 stock.
The original came with a cherry stock with carving in it. It was pretty but I could just never get used to the carving.
They called me the other day and said they had found a piece of Cherry burl and asked if I wanted it.
I finished it up today. 6 coats of Chambers oil followed by 4 coats of Tru oil. I rubbed the sheen off with a 3-M pad but then put 3 coats of renascence wax and 1 coat of dark wax on it.
It is still a little shiny but I need to wait a couple of weeks for everything to harden up before I try to rub it back again.
Headed to the Texas hill country tomorrow to put it to work.
Click to expand...
 
Beautyful work and wood Brother! Congrats on being a Past Worshipful master!!! Travel well my brother!!
 
Buff1958 said:
Finished my new Woodsrunner .54 stock.
The original came with a cherry stock with carving in it. It was pretty but I could just never get used to the carving.
They called me the other day and said they had found a piece of Cherry burl and asked if I wanted it.
I finished it up today. 6 coats of Chambers oil followed by 4 coats of Tru oil. I rubbed the sheen off with a 3-M pad but then put 3 coats of renascence wax and 1 coat of dark wax on it.
It is still a little shiny but I need to wait a couple of weeks for everything to harden up before I try to rub it back again.
Headed to the Texas hill country tomorrow to put it to work.
Click to expand...
WOW that's getting into the "too pretty to risk in the woods in the hand of ham-fisted Loyalist Dave" category!

LD
 
Buff1958 said:
Finished my new Woodsrunner .54 stock.
The original came with a cherry stock with carving in it. It was pretty but I could just never get used to the carving.
They called me the other day and said they had found a piece of Cherry burl and asked if I wanted it.
I finished it up today. 6 coats of Chambers oil followed by 4 coats of Tru oil. I rubbed the sheen off with a 3-M pad but then put 3 coats of renascence wax and 1 coat of dark wax on it.
It is still a little shiny but I need to wait a couple of weeks for everything to harden up before I try to rub it back again.
Headed to the Texas hill country tomorrow to put it to work.
Click to expand...
That's gonna be the prettiest girl in the hog killin woods!
 
2 shots said:
hi buff, thanks. with the easy off do you use a light or heavy coat and also did you wipe it down to get an even coat or just spray it on? also what about neutralizing? thanks again. mike
Click to expand...
i put a heavy coat .
let is hang for 7 minutes then washed it down with a water hose
 

Similar threads

Buff1958
Dropped my woodsrunner
Replies
1
Views
302
wiscoaster
wiscoaster
Buff1958
Highlighting grain in cherry stock
Replies
7
Views
680
centershot
C
Buff1958
Am I the only one who doesn’t really care for carving on a rifle stock?
3 4 5
Replies
91
Views
4K
Old-Duckman
Old-Duckman
Buff1958
dark area on cherry stock
Replies
4
Views
718
Buff1958
Buff1958
T
Second Kibler completed
Replies
7
Views
1K
scratcherky
S

Latest posts

Back
Top