Kibler parts for today,,,,,,,,,,,,,,,

Shop deals on ebay
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
olskool

olskool

32 Cal.
MLF Supporter
Joined
Apr 17, 2018
Messages
2,494
Reaction score
6,202
Location
THE WOODS OF S.C.
here is some Kibler SMR parts i cleaned up and colored today. i completely dissembled the lock and trigger for the process. they are not browned, they are temper bronzed like they would have been done back in the day. i also draw filed the butt plate and trigger guard and got rid of all seams. i
kibler parts (2).JPG
kibler parts (3).JPG
kibler parts (4).JPG
kibler parts (5).JPG
then sanded everything. i also did the barrel the same way and it is color matched. it took me around 10 hours. the gun this is for is one of Jims fancy Ash stock guns in 45, it is the 18th Kibler i have done, it will be living at my house till i am living in Gods house,,,,,,,,,,,,,,,,,,,,,,,,,,,,
 
Last edited:
That is a finish I have not heard of before. I kind of like the color. Would be interested in how you did it.
 
there is a couple of ways of doing it, from what i have read browning was not done till latter into the 1800s, but some say as early as the 1790s, so most likely these guns would have been charcoal blued, left in the white, or temper bronzed. either way i like it like this, but temper bronzed is heated to about 400 degrees for one hour. first i wanted it to have an old look with black undertones, so i put on cold blue then buff most of it off, then into the heat, then i quenched them with burnt oil. what makes it look good is the prep work that goes into it. when i was done yesterday my back was hurting! but according to some we are not "building guns" just assembling them. i get it for sure, certainly not a from the scratch-built gun, not even close! but nevertheless a lot of work to make it right, just another level of build i guess,,,,,,,,,,,,,,,,,,,,,,,,
 
I was going to say, that from the color and look, the parts reminded me of rods from an engine that got hot. Hot metal, quenched in used/burnt oil and there you go. I had never heard of it called that. But that look reminds me of so many old guns. That patina. Nice!

Oh, what about the frizzen?
 
olskool said:
there is a couple of ways of doing it, from what i have read browning was not done till latter into the 1800s, but some say as early as the 1790s, so most likely these guns would have been charcoal blued, left in the white, or temper bronzed. either way i like it like this, but temper bronzed is heated to about 400 degrees for one hour. first i wanted it to have an old look with black undertones, so i put on cold blue then buff most of it off, then into the heat, then i quenched them with burnt oil. what makes it look good is the prep work that goes into it. when i was done yesterday my back was hurting! but according to some we are not "building guns" just assembling them. i get it for sure, certainly not a from the scratch-built gun, not even close! but nevertheless a lot of work to make it right, just another level of build i guess,,,,,,,,,,,,,,,,,,,,,,,,
Click to expand...
To bake an apple pie from scratch one must first create the universe.
 

Similar threads

olskool
SOLD - Pending funds Kibler 40 cal.
Replies
8
Views
724
rmefbowhunter
rmefbowhunter
olskool
SOLD - Pending funds SMR 45
Replies
10
Views
829
olskool
olskool
Second-rate Marksman
  • Locked
SOLD Kibler Woodsrunner, Cherry, .45 Cal
Replies
6
Views
865
Second-rate Marksman
Second-rate Marksman
L
A Moment of Weakness
2
Replies
28
Views
2K
leakytire
L
C
40 caliber SMR , it works
Replies
7
Views
584
Buff1958
Buff1958

Latest posts

Back
Top