• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

William Moore Tubelock

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MrTwelvette

32 Cal
Joined
Feb 14, 2024
Messages
24
Reaction score
79
Location
Southampton uk
I have purchased but not yet collected a (notionally) 12 bore Tubelock. i'm rather pleased and want to share

Auction description as follows

'William Moore percussion tubelock side by side double barrelled sporting gun with named and engraved lock, engraved scenes of dogs to the trigger guard, scrolling engraving to the butt plate, hammers and top plate, chequered grip, vacant wrist cartouche, brass tipped wooden ram-rod and 32 inch Damascus barrels engraved 'William Moore 78 Edgeware Road London', overall length 122cm'


my limited 'research' is that the maker was at 78 Edgeware road from 1828 and changed the company name in 1836 giving upper and lower dates for the gun
https://www.wmg-london.com/history/

i didnt take any pictures at the viewing, but both barrels have the crown over curly 'P' type London proof marks, bores are good, some sections of shallow pitting.
i was surprised how heavy the barrels are, but maybe i dont have a good frame of reference, i'll weigh everything next week.



gun points well, fits me close enough to be easily shootable, and i'll try and take it on a walked up pheasant day in January. I might need to sweet talk the keeper because i dont think they've ever had a muzzle loader there. failing that i'll take it squirrel stalking in the summer and maybe see about finding some pigeon shooting.

Below are some pictures taken by the auction house, the quality is varied

1731101057756.png

1731101078052.png
1731101087173.png

1731101098904.png

1731101111342.png

1731101134678.png
 
How are you going to make the tube primers?


Capandball makes tubes at 6 minutes in the above video. Using brass foil and roll of caps for toy cap guns. I expect I'll need to experiment with sizes.

How does the saying go?

'We do these things not because they are easy, but because we thought they would be easy'
 


Capandball makes tubes at 6 minutes in the above video. Using brass foil and roll of caps for toy cap guns. I expect I'll need to experiment with sizes.

How does the saying go?

'We do these things not because they are easy, but because we thought they would be easy'

A nice looking gun just hope it shoots ok for you , I used to make my own tubes using copper tubing purchased from a model make shop that was way back in the 1980,s,If you have not shot a tube lock you will find no difference to a percussion cap .Good luck on your purchased .
Feltwad
 
Back
Top