• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD Mountain Man Wool Wolf Ear Hood $55 Free Ship

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AnotherHawkenGuy

Boss Level 9000
Joined
Nov 25, 2024
Messages
29
Reaction score
21
Location
Oregon
One size fits all.. Decorated in the back with turkey feathers and blue wool ribbon strips. Has brown leather ties and features a leather welt sewn with faux sinew. Hood is made from a camel brown 100% wool Pendleton blanket. Free shipping to lower 48 United States. PayPal friends and family preferred, will also accept cash, personal check or money order.
IMG_4958.jpeg
IMG_4960.jpeg
IMG_4959.jpeg
IMG_4964.png
IMG_4956.jpeg
 
Last edited:
What is the measurement in inches from front to back at the top? As viewed from the side?
approximately 9” of head space on top and sides. If measuring from front of face to bottom back of hat it is 26”. If viewed from the side, 20” from middle top to bottom of side. I hope I understood you correctly, hope that helps. Here’s some photo measurements that might help more;
IMG_4992.jpeg
IMG_4990.jpeg
IMG_4991.jpeg
 
I agree, I really like your work! The first pic above addresses my question.

I wear a 7 3/8 size hat. I like that front to back to be about 11”

The reason is most of the time if it’s really cold I have a wool cap of some sort on and I want the hood to be a hood and fit over that with enough material left to protect the sides of my face.

If worn with out a cap underneath you can just roll the front edge back one time.

This one is a bit too small for me, but I would buy a copy made to my size for sure.

This is a good one guys, we need more folks here making quality stuff like the OP.
 
I agree, I really like your work! The first pic above addresses my question.

I wear a 7 3/8 size hat. I like that front to back to be about 11”

The reason is most of the time if it’s really cold I have a wool cap of some sort on and I want the hood to be a hood and fit over that with enough material left to protect the sides of my face.

If worn with out a cap underneath you can just roll the front edge back one time.

This one is a bit too small for me, but I would buy a copy made to my size for sure.

This is a good one guys, we need more folks here making quality stuff like the OP.
Sending you a pm.
 
Back
Top