My WoodsRunner mystery metal

stubshaft · Saturday at 7:01 PM

I just recently (like three days ago) bought a Kibler WoodsRunner at an estate sale. For those of you that have built "assembled" one of Jims fantastic kits you know what I mean. Took about 6 hours to get to this point.

This is not my first rodeo as I have previously built one of his Colonials that I bought 6 years ago.

The interesting thing is that I always run a greased patch down the barrel to ensure that it does not rust. I do this in the event I get sidetracked and do not finish the build in a timely manner. However, when I ran the patch down this GM .54 barrel I was rewarded? with a small pile of metal shaving. I pulled out my borescope and found this at the bottom of the barrel.

I used my tow worm and managed to remove all of the shavings, although clearing the vent hole was a little challenging.

I was just wondering where these shaving came from?

2 shots · Saturday at 7:09 PM

likely drilling and tapping the touch hole. update... nope to large missed it the first time.

Beaverman2 · Saturday at 7:10 PM

Leftovers from manufacturing, mine had some shavings too, no biggy, clean right up

Phil Coffins · Saturday at 7:16 PM

I found these in mine, surprised yes but they cleaned out OK.

3F60C3BE-302C-431B-9312-88AB1E17EA4D by Oliver Sudden, on Flickr

Bnewberry · Saturday at 7:42 PM

Mine had this too. That’s why you run a patch on a new gun, right?

TerryK · Saturday at 7:44 PM

Found the same in my woodsrunner a couple years ago. As a courtesy I let Kibler know.
No big deal, but surprising as Phil said. Rifle shoots great.

PEARL DRUMS · Sunday at 9:34 AM

I blasted air through my liner hole and got about the same as Mr coffins did. Part of the metal forming game.

Siringo · Sunday at 9:41 AM

stubshaft said:
I just recently (like three days ago) bought a Kibler WoodsRunner at an estate sale. For those of you that have built "assembled" one of Jims fantastic kits you know what I mean. Took about 6 hours to get to this point.

This is not my first rodeo as I have previously built one of his Colonials that I bought 6 years ago.

The interesting thing is that I always run a greased patch down the barrel to ensure that it does not rust. I do this in the event I get sidetracked and do not finish the build in a timely manner. However, when I ran the patch down this GM .54 barrel I was rewarded? with a small pile of metal shaving. I pulled out my borescope and found this at the bottom of the barrel.

I used my tow worm and managed to remove all of the shavings, although clearing the vent hole was a little challenging.

I was just wondering where these shaving came from?

Mine had this too. It from tapping the hole for the white lightning liner and or breech plug. No worry.

ZUG · Sunday at 2:22 PM

Now I'm going to borescope my barrel - thanks for the heads-up! :ThankYou:

Indy Durtdigger · Sunday at 3:51 PM

All three of mine had those shavings, looks like from the rifling process to me except one of mine is a smoothbore. Not all from the same maker either. Know I've got one each Douglas and Green Mountain and for some reason I think one of them is different yet.

James Kibler · Sunday at 8:58 PM

Yeah, sometimes there is some machining swarf left in barrels. I don't really worry about it, as it doesn't cause any harm whatsoever. First shot it will be blown out.

Phil Coffins · Sunday at 10:00 PM

James Kibler said:
Yeah, sometimes there is some machining swarf left in barrels. I don't really worry about it, as it doesn't cause any harm whatsoever. First shot it will be blown out.

That’s the same answer you gave me when I call about these chips. As simple as it would be to clear these chips to show the care your rifles receive in all other respects would be expected.

James Kibler · Monday at 9:47 AM

Phil Coffins said:
That’s the same answer you gave me when I call about these chips. As simple as it would be to clear these chips to show the care your rifles receive in all other respects would be expected.

Well, there are thousands of things that must be right with a kit such as ours. These are what is focused on.

We do blow them out, but not always the best. As said, it makes no difference and I really don't worry about it.

I find it odd how there are certain things that customers become concerned about when they are no issue whatsoever.

Might be a good video topic someday...

tom mesa · Monday at 9:29 PM

Sometimes we have to remove machine marks from the out side of a barrel , sometimes we have to remove some machine residue what is so hard about having to do that! We can pay to have the kit put together so we don't have to do anything to have a rifle to have. Get a life !

mikesto44 · 2024-12-18T09:20:29-0500

You would think before the breach plug was installed.
The chips would be removed. To prevent possible damage to the threads ?

CyrusP · 2024-12-18T12:22:48-0500

These are kits. Some assembly required, as well as finish work. You’re sanding, staining, filing, bluing, etc. Send a wet patch down the bore while you’re at it.

But by all means, continue to gripe.

rbeave · 2024-12-18T20:12:27-0500

Same chips in my woodsrunner barrel I received last week. Came out no problemo with a jag and patch and a little shake and bump. Looks like remnants left behind from the breech plug threading. Didn't have any negative impact that I can tell.. thing shoots very well

mikesto44 · 2024-12-18T20:55:52-0500

No bodies gripping, but after 39 + years in a machine shop . 25 of that as a quality control person. Working on government projects for the space program you ( I ) have a tendency to be real particular.

French Colonial · 2024-12-19T09:05:29-0500

Does it bother anyone that the barrel needs draw filed.
Does it bother anyone that the stock needs sanding.

There are some metal chips from machining left in my barrel of my unfinished gun, OH NO!!! what a horror!
I never saw anything on Kibler's website saying it was ready to shoot when shipped.

It must be winter and we need something to obsess over.

Indy Durtdigger · 2024-12-19T10:17:41-0500

I think most of us that posted in this thread weren't and aren't complaining. More just pointing out that to one extent or another those leftovers are present and the OP didn't get an exception to the norm.

My WoodsRunner mystery metal

Help Support Muzzleloading Forum:

40 Cal.

69 Cal.

50 Cal.

69 Cal.

45 Cal.

40 Cal.

40 Cal

32 Cal.

Pilgrim

45 Cal.

45 Cal.

69 Cal.

45 Cal.

Mesa,Az

50 Cal.

45 Cal.

32 Cal

50 Cal.

62 Cal.

45 Cal.

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!